Experimental study of off-axis compression behaviour in dynamic loading: The open hole effect

被引：4
作者：
Rodriguez-Sereno, J. M. [1 ]
Pernas-Sanchez, J. [1 ]
Artero-Guerrero, J. A. [1 ]
Lopez-Puente, J. [1 ]
Lukic, B. [2 ]
机构：
[1] Univ Carlos III Madrid, Dept Continuum Mech & Struct Anal, Ave Univ 30, Madrid 28911, Spain
[2] European Synchrotron Radiat Facil, CS40220, F-38043 Grenoble 9, France
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 173卷
基金：
瑞典研究理事会;
关键词：
Strain rate effects; Split Hopkinson pressure bar; Open hole compression; Woven; RATE-DEPENDENT BEHAVIOR; STRAIN RATE BEHAVIOR; FAILURE CRITERIA; WOVEN COMPOSITE; PART I; IMPACT; MODEL; DEFORMATION; STRENGTH; TESTS;
D O I：
10.1016/j.compositesa.2023.107653
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the open hole on the behaviour of carbon fibre reinforced polymer composites (CFRP) under compressive dynamic loading was investigated. To this end, two different set-ups (quasi-static and dynamic) for compression loading were developed. The un-notched plain woven CFRP (AS4 fibres and 8552 matrix) studied in this work was characterized in terms of apparent strength at different off-axis angles at compression loading. The maximum stress criterion was found to be the model which better represents the transverse-shear failure points of the woven composite. Later the effect of the open hole in similar samples were studied, concluding that the hole effect has more impact on the strength for samples with the fibre align with the load. A modification of the Lekhnitskii theory has been proposed in order to take into account the non-linearity of the material and to unveil its role in open hole specimens.
引用
收藏
页数：14
相关论文
共 50 条
  • [21] Nonlinear Mechanical Response of CFRP Laminates under Off-Axis Tensile Loading
    Ogihara, Shinji
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2010, 17 (02): : 133 - 141
  • [22] Experimental investigation of the failure envelope of unidirectional carbon-epoxy composite under high strain rate transverse and off-axis tensile loading
    Kuhn, Peter
    Ploeckl, Marina
    Koerber, Hannes
    DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 2015, 94
  • [23] Effects of thermal stress and imperfect interfacial bonding on the mechanical behavior of composites subjected to off-axis loading
    Ye, Junjie
    Chen, Xuefeng
    Zhai, Zhi
    Li, Bing
    Zi, Yanyang
    He, Zhengjia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30): : 7530 - 7537
  • [24] Influence of temperature and thickness on the off-axis behaviour of short glass fibre reinforced polyamide 6.6-Quasi-static loading
    De Monte, M.
    Moosbrugger, E.
    Quaresimin, M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (07) : 859 - 871
  • [25] Experimental investigation on mechanical properties of unidirectional and woven fabric glass/epoxy composites under off-axis tensile loading
    Cai, Deng'an
    Zhou, Guangming
    Wang, Xiaopei
    Li, Chao
    Deng, Jian
    POLYMER TESTING, 2017, 58 : 142 - 152
  • [26] Off-axis compression behavior and failure mechanisms of needled carbon/quartz fiber reinforced phenolic resin composite based on acoustic emission
    Kuang, Yue
    Li, Jikang
    Wang, Weixing
    Liu, Zheng
    Zhang, Zhe
    Wang, Xin
    Chen, Xu
    POLYMER COMPOSITES, 2024, 45 (09) : 8147 - 8162
  • [27] Micromechanical modeling of interface damage of metal matrix composites subjected to off-axis loading
    Mahmoodi, M. J.
    Aghdam, M. M.
    Shakeri, M.
    MATERIALS & DESIGN, 2010, 31 (02): : 829 - 836
  • [28] Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding
    Chen, Xuefeng
    Ye, Junjie
    Zhai, Zhi
    He, Zhengjia
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 54 (01) : 113 - 120
  • [29] Experimental Investigation of Mechanical Properties and Failure Mechanisms in Jute-Polyester Composite Laminates under Off-Axis Tensile Loading
    Mache A.
    Deb A.
    Mater. Perform. Charact., 1 (111-120): : 111 - 120
  • [30] A micromechanical approach for the fatigue failure prediction of unidirectional polymer matrix composites in off-axis loading including the effect of viscoelasticity
    Sayyidmousavi, Alireza
    Bougherara, Habiba
    Fawaz, Zouheir
    ADVANCED COMPOSITE MATERIALS, 2015, 24 : 65 - 77
12345