Experimental study of off-axis compression behaviour in dynamic loading: The open hole effect

被引：4
作者：
Rodriguez-Sereno, J. M. [1 ]
Pernas-Sanchez, J. [1 ]
Artero-Guerrero, J. A. [1 ]
Lopez-Puente, J. [1 ]
Lukic, B. [2 ]
机构：
[1] Univ Carlos III Madrid, Dept Continuum Mech & Struct Anal, Ave Univ 30, Madrid 28911, Spain
[2] European Synchrotron Radiat Facil, CS40220, F-38043 Grenoble 9, France
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 173卷
基金：
瑞典研究理事会;
关键词：
Strain rate effects; Split Hopkinson pressure bar; Open hole compression; Woven; RATE-DEPENDENT BEHAVIOR; STRAIN RATE BEHAVIOR; FAILURE CRITERIA; WOVEN COMPOSITE; PART I; IMPACT; MODEL; DEFORMATION; STRENGTH; TESTS;
D O I：
10.1016/j.compositesa.2023.107653
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the open hole on the behaviour of carbon fibre reinforced polymer composites (CFRP) under compressive dynamic loading was investigated. To this end, two different set-ups (quasi-static and dynamic) for compression loading were developed. The un-notched plain woven CFRP (AS4 fibres and 8552 matrix) studied in this work was characterized in terms of apparent strength at different off-axis angles at compression loading. The maximum stress criterion was found to be the model which better represents the transverse-shear failure points of the woven composite. Later the effect of the open hole in similar samples were studied, concluding that the hole effect has more impact on the strength for samples with the fibre align with the load. A modification of the Lekhnitskii theory has been proposed in order to take into account the non-linearity of the material and to unveil its role in open hole specimens.
引用
收藏
页数：14
相关论文
共 50 条
  • [1] Experimental and numerical investigation on the failure behavior of Bouligand laminates under off-axis open-hole tensile loading
    Luo, Hangyuan
    Wang, Hongshuai
    Zhao, Zhiyong
    Xue, Hongqian
    Li, Yujun
    COMPOSITE STRUCTURES, 2023, 313
  • [2] FAILURE PREDICTION MODEL FOR NCF LAMINATES LOADED IN COMPRESSION AND THE EFFECT OF OFF-AXIS LOADING
    Shipsha, Anton
    Burman, Magnus
    Ekh, Johan
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [3] Influence of off-axis ply orientation on the axial compression behaviour of CFRP tubes
    Tao, Jie
    Li, Feng
    Zhao, Qilin
    Zhang, Dongdong
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36 (06) : 399 - 413
  • [4] Characterisation of mechanical behaviour of fibre reinforced thermoplastic composites subjected to off-axis compressive loading
    Ma, Y.
    Li, Y.
    Liu, L.
    REVISTA INTERNACIONAL DE METODOS NUMERICOS PARA CALCULO Y DISENO EN INGENIERIA, 2023, 39 (01):
  • [5] Compressive damage mechanism of GFRP composites under off-axis loading: Experimental and numerical investigations
    Zhou, H. W.
    Yi, H. Y.
    Gui, L. L.
    Dai, G. M.
    Peng, R. D.
    Wang, H. W.
    Mishnaevsky, Leon, Jr.
    COMPOSITES PART B-ENGINEERING, 2013, 55 : 119 - 127
  • [6] Prediction of the off-axis stress-strain relation of wood under compression loading
    Yoshihara, Hiroshi
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2009, 67 (02) : 183 - 188
  • [7] Prediction of the off-axis stress-strain relation of wood under compression loading
    Yoshihara, Hiroshi
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2009, 67 (02) : 183 - 188
  • [8] Off-Axis Compressive Behaviour of Fibre Reinforced Thermoplastic Composites
    Ma, Yifan
    Li, Yazhi
    Liu, Lu
    MATERIALS, 2022, 15 (16)
  • [9] Fatigue mechanisms of wheel rim steel under off-axis loading
    Zhu, Zhenyu
    Zhu, Yilin
    Wang, Qingyuan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773
  • [10] Experimental analysis of off-axis mechanical behaviors of PVC coated fabrics subjected to cyclic loading
    Xu, Junhao
    Zhang, Yingying
    Wu, Meng
    Zhao, Yushuai
    POLYMER TESTING, 2019, 80
12345