Al-40Sn Alloy Produced by Selective Laser Melting of Elemental Powder Mixtures

被引：3

作者：

Rusin, N. M. ^{[1
]}

Skorentsev, A. L. ^{[1
]}

Akimov, K. O. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk 634055, Russia

来源：

PHYSICS OF METALS AND METALLOGRAPHY | 2023年 / 124卷 / 09期

关键词：

aluminum alloy; selective laser melting; structure; AL-SN; ALUMINUM; BEHAVIOR; TIN;

D O I：

10.1134/S0031918X23601476

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Al-40Sn alloy has been synthesized by selective laser melting (SLM) of a mixture of elemental powders. Semielliptical traces of melt are observed within the structure of the alloy, with the borders of the melted regions decorated with pores and tin inclusions. The melt traces exhibit an internal structure composed of fine crystalline regions containing columnar Al crystals that are identically oriented and separated by thin tin interlayers. As the laser power increases, the melt solidification rate decreases, increasing the size of the aluminum crystal cells and the thickness of the tin interlayers separating them. The porosity of the alloy decreases slowly with increasing power. To minimize the porosity, the parameters of the SLM process must be changed.

引用

页码：908 / 915

页数：8

共 19 条

[1]

Abed E.J., 2012, Asian Trans. Eng., V2, P89

[2]

[Базалеева К.О. Bazaleeva K.O.], 2016, [Вестник Московского государственного технического университета им. Н.Э. Баумана. Серия: Машиностроение, Herald of the Bauman Moscow State Technical University. Mechanical Engineering, Vestnik Moskovskogo gosudarstvennogo tekhnicheskogo universiteta im. N.E. Baumana. Seriya: Mashinostroenie], P117

[3]

Bushe NA., 1974, BEARINGS MADE ALUMIN

[4] Influence of Melt Superheating Treatment on the Cast Structure of Al-Sn Alloys [J].

Chikova, O. A. ;

Vyukhin, V. V. ;

Tsepelev, V. S. .

RUSSIAN JOURNAL OF NON-FERROUS METALS, 2021, 62 (03) :286-292

[5] Polytherms of Angles of Aluminum and Aluminum-Lithium Alloy Wetting by Tin-Based Melts [J].

Dalakova, N. V. ;

Elekoeva, K. M. ;

Kashezhev, A. Z. ;

Manukyants, A. R. ;

Prokhorenko, A. D. ;

Ponezhev, M. Kh. ;

Sozaev, V. A. .

JOURNAL OF SURFACE INVESTIGATION, 2014, 8 (02) :360-363

[6]

Dynin N. V., 2017, The influence of process parameters of selective laser melting on the structure of aluminum alloy Al-Si-Mg system, P3, DOI [10.18577/2307-6046-2017-0-10-1-1, DOI 10.18577/2307-6046-2017-0-10-1-1]

[7] On productivity of laser additive manufacturing [J].

Gusarov, Andrey V. ;

Grigoriev, Sergey N. ;

Volosova, Marina A. ;

Melnik, Yuriy A. ;

Laskin, Alexander ;

Kotoban, Dmitriy V. ;

Okunkova, Anna A. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 261 :213-232

[8] Production of ultrafine microstructures in Al-Sn, Al-Sn-Cu and Al-Sn-Cu-Si alloys for use in tribological applications [J].

Harris, SJ ;

McCartney, DG ;

Horlock, AJ ;

Perrin, C .

ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 :519-525

[9] Microstructural and mechanical behavior of highly deformed Al-Sn alloys [J].

Hernandez, O. ;

Gonzalez, G. .

MATERIALS CHARACTERIZATION, 2008, 59 (05) :534-541

[10] Wear behavior of Al-Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering [J].

Liu, X. ;

Zeng, M. Q. ;

Ma, Y. ;

Zhu, M. .

WEAR, 2008, 265 (11-12) :1857-1863

← 1 2 →