Enhancing wettability of sapphire (Al2O3) substrate through laser surface texturing

被引:8
作者
Bakhtiyari, Ali Naderi [1 ]
Yadav, Ashish [1 ]
Wu, Yongling [1 ]
Zheng, Hongyu [1 ]
机构
[1] Shandong Univ Technol, Ctr Adv Laser Mfg CALM, Sch Mech Engn, Zibo 255000, Peoples R China
基金
国家重点研发计划;
关键词
Laser processing; Ceramics; Surfaces; Texture; Microstructure;
D O I
10.1016/j.matlet.2023.135506
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Sapphire (Al2O3) has emerged as an incredibly versatile ceramic material, attracting significant interest across various fields due to its superior properties. The potential to control its wettability offers opportunities for enhancing the functionalities of sapphire-based devices. This study focuses on achieving superhydrophilic sur-faces on sapphire substrates using a 355 nm nanosecond laser. The effects of the Laser Surface Texturing (LST) parameters on the morphology and wettability of the samples were examined through a Taguchi L16 experi-mental design. The results showed that the repetition rate and scanning speed influenced the Contact Angle (CA) and Surface Roughness (Ra) of the laser-textured sapphire. Lower repetition rates and higher scanning speeds resulted in rougher surfaces and smaller contact angles. The minimum CA of 4.5 degrees was obtained at a repetition rate of 50 kHz and a scanning speed of 1100 mm/s. The study highlights the importance of controlling processing parameters to achieve desired wetting properties for superhydrophilic surfaces. The findings of this research provide insights into the application of LST for achieving superhydrophilic surfaces on sapphire substrates.
引用
收藏
页数:4
相关论文
共 50 条
[21]   FRICTION AND WEAR REDUCTION OF AL2O3 CERAMICS BY LASER-INDUCED SURFACE ALLOYING [J].
ZUMGAHR, KH ;
BOGDANOW, C ;
SCHNEIDER, J .
WEAR, 1995, 181 :118-128
[22]   An XRD, FTIR and TPD investigation of NO2 surface adsorption sites of δ, γ Al2O3 and barium supported δ, γ Al2O3 [J].
Pazé, C ;
Gubitosa, G ;
Giacone, SO ;
Spoto, G ;
Xamena, FXLI ;
Zecchina, A .
TOPICS IN CATALYSIS, 2004, 30-1 (1-4) :169-175
[23]   An XRD, FTIR and TPD investigation of NO2 surface adsorption sites of δ, γ Al2O3 and barium supported δ, γ Al2O3 [J].
C. Pazé ;
G. Gubitosa ;
S. Orso Giacone ;
G. Spoto ;
F.X. Llabrés i Xamena ;
A. Zecchina .
Topics in Catalysis, 2004, 30-31 :169-175
[24]   High resolution optical microprobe investigation of surface grinding stresses in Al2O3 and Al2O3/SiC nanocomposites [J].
Guo, Sheng ;
Limpichaipanit, Apichart ;
Todd, R. I. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (1-2) :97-109
[25]   Enhancing adhesion of Al2O3 scale on Ti-Al intermetallics by alloying: A first principles study [J].
Li, Y. ;
Dai, J. H. ;
Song, Y. .
COMPUTATIONAL MATERIALS SCIENCE, 2020, 181 (181)
[26]   Microstructural characterizations of metallized Al2O3 before/after surface treatment and Al2O3/Cu soldered joint [J].
Hu, Hongtao ;
Huang, Longkun ;
Xu, Biao ;
Haider, Julfikar ;
Khan, Fahd Nawaz ;
Mao, Yangwu .
MATERIALS CHARACTERIZATION, 2024, 217
[27]   Surface composition-lubrication design of Al2O3/Mo laminated composites-Part I: Influence of laser surface texturing on the tribological behavior at 25 and 800 °C [J].
Fang, Yuan ;
Zhang, Yongsheng ;
Fan, Hengzhong ;
Hu, Tianchang ;
Song, Junjie ;
Hu, Litian .
WEAR, 2015, 334 :23-34
[28]   Micromachining of AlN and Al2O3 Using Fiber Laser [J].
Preusch, Florian ;
Adelmann, Benedikt ;
Hellmann, Ralf .
MICROMACHINES, 2014, 5 (04) :1051-1060
[29]   Possibility of Phase Transformation of Al2O3 by a Laser: A Review [J].
Matijosius, Tadas ;
Padgurskas, Juozas ;
Bikulcius, Gedvidas .
CRYSTALS, 2024, 14 (05)
[30]   Mechanical properties of Al2O3 and Al2O3/Al with Gyroid structure obtained by stereolithographic additive manufacturing and melt infiltration [J].
Lu, Junjie ;
Wang, Dong ;
Zhang, Keqiang ;
Li, Suwen ;
Zhang, Bin ;
Zhang, Xueqin ;
Zhang, Lu ;
Wang, Wenqing ;
Li, Ying ;
He, Rujie .
CERAMICS INTERNATIONAL, 2022, 48 (16) :23051-23060