Relationship Between Properties Degradation and Critical Aging Time of Super Austenitic and Duplex Stainless Steels

被引：0
|
作者：
Choi, S. H. [1 ]
Yoo, Y. R. [2 ]
Won, S. Y. [1 ]
Kim, G. B. [1 ]
Kim, Y. S. [1 ,2 ]
机构：
[1] Andong Natl Univ, Dept Mat Sci & Engn, 1375 Gyeongdong Ro, Andong 36729, Gyeongbuk, South Korea
[2] Andong Natl Univ, Mat Res Ctr Energy & Clean Technol, 1375 Gyeongdong Ro, Andong 36729, Gyeongbuk, South Korea
来源：
CORROSION SCIENCE AND TECHNOLOGY-KOREA | 2023年 / 22卷 / 05期
关键词：
Critical aging time; CPT; Pitting potential; Hardness; Sigma fraction; SIGMA-PHASE PRECIPITATION; INTERGRANULAR CORROSION; BEHAVIOR; RESISTANCE; CR;
D O I：
10.14773/cst.2023.22.5.330
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
The objective of this study was to analyze effects of aging time on property degradation of super austenitic stainless steel of PRE 52.8 and super duplex stainless steel of PRE 48.7. To analyze corrosion properties based on aging time, a critical pitting temperature test was performed in a solution of 6% FeCl + 1% HCl and an anodic polarization test was performed in deaerated 0.5N HCl + 1N NaCl solution at a temperature of 50 C. Surface hardness was measured to analyze mechanical properties. It was found that corrosion properties and mechanical properties deteriorated rapidly as aging time increased. Critical pitting temperature had the most effect on critical aging time at which property changes occurred rapidly, followed by pit-ting potential and hardness. This trend was found to be closely related to the fraction of sigma phase. Rate of sigma phase formation was found to be significantly faster in duplex stainless steel than in austenitic stainless steel.
引用
收藏
页码：330 / 340
页数：11
相关论文
共 50 条
  • [21] Relationship between the microstructure and local corrosion properties of weld metal in austenitic stainless steels
    Tokita, Shun
    Kadoi, Kota
    Aoki, So
    Inoue, Hiroshige
    CORROSION SCIENCE, 2020, 175
  • [22] Analysis of the influence of the anisotropy induced by cold rolling on duplex and super-austenitic stainless steels
    Finelli, Angelo
    Labanti, Martino
    FRATTURA ED INTEGRITA STRUTTURALE, 2010, (13): : 24 - 30
  • [23] Welding guidelines for duplex, super duplex and hyper duplex stainless steels
    Frodigh, M.
    Bjornstedt, P. -A.
    METALLURGIA ITALIANA, 2017, (09): : 36 - 42
  • [24] Electronic properties and corrosion resistance of passive films on austenitic and duplex stainless steels
    Tranchida, G.
    Clesi, M.
    Di Franco, F.
    Di Quarto, F.
    Santamaria, M.
    ELECTROCHIMICA ACTA, 2018, 273 : 412 - 423
  • [25] Effect of Microstructural Characteristics on Mechanical Properties of Austenitic, Ferritic, and γ-α Duplex Stainless Steels
    Mitsuhiro Okayasu
    Daiki Ishida
    Metallurgical and Materials Transactions A, 2019, 50 : 1380 - 1388
  • [26] Effect of Microstructural Characteristics on Mechanical Properties of Austenitic, Ferritic, and - Duplex Stainless Steels
    Okayasu, Mitsuhiro
    Ishida, Daiki
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (03): : 1380 - 1388
  • [27] Mechanical and micro-structural studies of pulsed and constant current TIG weldments of super duplex stainless steels and Austenitic stainless steels
    Yelamasetti, Balram
    Karuna, B. N. R.
    Vardhan, T. Vishnu
    Dasore, Abhishek
    Saxena, Kuldeep K.
    Faroque, Firoz Alam
    Revathi, V.
    Abduvalieva, Dilsora
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2024, 43 (01)
  • [28] Super duplex stainless steels for peak performance
    AB Sandvik Steel, Sandviken, Sweden
    Scand J Metall, Suppl 1 (71-76):
  • [29] Hydrogen embrittlement in super duplex stainless steels
    Liang, X. Z.
    Zhao, G-H
    Dodge, M. F.
    Lee, T. L.
    Dong, H. B.
    Rivera-Diaz-del-Castillo, P. E. J.
    MATERIALIA, 2020, 9
  • [30] Super duplex stainless steels for peak performance
    Thorvaldsson, T
    SCANDINAVIAN JOURNAL OF METALLURGY, 1997, 26 : 71 - 76
12345