Effect of sintering procedures on optical properties, chemical composition, and grain size of monolithic zirconia ceramic at different thicknesses after hydrothermal aging: An in vitro study

被引:1
作者
Albayrak, Haydar [1 ]
Eraslan, Ravza [1 ]
Aydinlioglu, Omer [2 ]
机构
[1] Erciyes Univ, Fac Dent, Dept Prosthodont, Kayseri, Turkiye
[2] Erciyes Univ, Dept Text Engn, Kayseri, Turkiye
关键词
3 Mol% yttria-stabilized tetragonal zirconia polycrystal; fluorescence parameter; grain size; sintering procedure; TRANSLUCENCY;
D O I
10.4103/jips.jips_345_22
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Aim: The purpose of the present study was to examine the optical properties, chemical composition, and grain size (GS) of monolithic zirconia (MZ) ceramic at different thicknesses sintered using different procedures after hydrothermal aging.Settings and Design: An in vitro study.Materials and Methods: Forty MZ discs (0.5-mm thickness [Group-0.5] and 1-mm thickness [Group-1]; 12 mm diameter) were milled and divided according to standard (Group-ST) and speed (Group-SP) sintering procedures. All specimens were hydrothermally aged at 134? after sintering. Translucency (TP), opalescence (OP), and fluorescence (delta E(ab)FNx01-FL) parameters were calculated using the color coordinates (LFNx01, aFNx01, bFNx01, respectively) of the discs. The chemical composition and the GS of the specimens were characterized using X-ray fluorescence spectroscopy and a scanning electron microscopy, respectively. Statistical Analysis Used: TPs and delta E(ab)FNx01-FLs were analyzed using independent samples t-tests and Mann-Whitney U-tests while a two-way analysis of variance (ANOVA) was used for OPs. Results: Group-1 showed significantly lower TP than Group-0.5 (P < 0.001) but a significantly higher OP (P = 0.014). Group-SP showed significantly higher OP (P = 0.00003) and delta EabFNx01-FL (P = 0.0026) values than Group-ST without considering the thickness. Group-SP (0.29 +/- 0.119 mu m) had a smaller GS than Group-ST (0.306 +/- 0.142 mu m). Compared to Group-ST, Group-SP had a lower percentage of Y2O3 and a higher percentage of Al2O3. Conclusion: The effect of the sintering procedure on TP and OP of MZ was not perceived by the naked eye. The speed sintering procedure may increase delta EFNx01ab-FL of MZ to higher values than natural teeth when compared with standard sintering. The speed sintering may cause minor changes in GS and the chemical composition of MZ.
引用
收藏
页码:57 / 64
页数:8
相关论文
共 34 条
[1]   Effect of masticatory simulation on the translucency of different types of dental zirconia [J].
Abd Alraheam, Islam ;
Donovan, Terry E. ;
Rodgers, Brandon ;
Boushell, Lee ;
Sulaiman, Taiseer A. .
JOURNAL OF PROSTHETIC DENTISTRY, 2019, 122 (04) :404-409
[2]   The influence of altering sintering protocols on the optical and mechanical properties of zirconia: A review [J].
Ahmed, Walaa M. ;
Troczynski, Tom ;
McCullagh, Anthony P. ;
Wyatt, Chris C. L. ;
Carvalho, Ricardo M. .
JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY, 2019, 31 (05) :423-430
[3]   Impact of sintering procedure and clinical adjustment on color stability and translucency of translucent zirconia [J].
Al-Zordk, Walid ;
Saker, Samah .
JOURNAL OF PROSTHETIC DENTISTRY, 2020, 124 (06) :788.e1-788.e9
[4]   Effect of shading technique and thickness on color stability and translucency of new generation translucent zirconia [J].
Alp, Gulce ;
Subasi, Meryem Gulce ;
Seghi, Robert R. ;
Johnston, William M. ;
Yilmaz, Burak .
JOURNAL OF DENTISTRY, 2018, 73 :19-23
[5]   Quantitative clinical evaluation of esthetic properties of incisors [J].
Ardu, Stefano ;
Feilzer, Albert J. ;
Devigus, Alessandro ;
Krejci, Ivo .
DENTAL MATERIALS, 2008, 24 (03) :333-340
[6]   Optical properties of CAD-CAM ceramic systems [J].
Bona, Alvaro Della ;
Nogueira, Audrea D. ;
Pecho, Oscar E. .
JOURNAL OF DENTISTRY, 2014, 42 (09) :1202-1209
[7]   Hydrothermal degradation of a 3Y-TZP translucent dental ceramic: A comparison of numerical predictions with experimental data after 2 years of aging [J].
Cattani-Lorente, Maria ;
Durual, Stephane ;
Amez-Droz, Michel ;
Wiskott, H. W. Anselm ;
Scherrer, Susanne S. .
DENTAL MATERIALS, 2016, 32 (03) :394-402
[8]  
Celik E, 2019, TURKIYE KLINIKLERI J, P277
[9]   Mechanical properties, aging stability and translucency of speed-sintered zirconia for chairside restorations [J].
Cokic, Stevan M. ;
Vleugels, Jef ;
Van Meerbeek, Bart ;
Camargo, Bernardo ;
Willems, Evita ;
Li, Maoyin ;
Zhang, Fei .
DENTAL MATERIALS, 2020, 36 (07) :959-972
[10]  
Cotton PS, 2019, THESIS HAWAII UNIFON