Optimising thermal design for cross flow heat exchanger in fan coil units

被引：0

作者：

Hassan, Ahmed M. ^{[1
]}

Alwan, Adil Abbas ^{[2
]}

Hamzah, Hameed K. ^{[3
]}

机构：

[1] Univ Al Qadisiyah, Dept Mech Engn, Al Qadisiyah, Iraq

[2] Natl Univ Sci & Technol, Tech Coll Engn, Dhi Qar, Iraq

[3] Univ Babylon, Coll Engn, Dept Mech Engn, Babylon, Iraq

来源：

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING | 2025年 / 23卷 / 02期

关键词：

Cross flow; heat exchanger; epsilon-NTU; fan coil unit; thermal design; BULB TEMPERATURE; OPTIMIZATION; SYSTEM;

D O I：

10.1080/14484846.2024.2312322

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Analytical and numerical solutions for determining the dimensions of a cross-flow heat exchanger under different conditions have been developed in this study. The analytical solution using the epsilon-NTU method is used to find the initial dimensions of the cross-flow heat exchanger. The numerical solution is used to validate the analytical solution and optimise the cooling coil dimensions. The epsilon-NTU design results show the effect of water mass flow rate, air inlet velocity, and the outer tube diameter of the cooling coil. The distribution of air and water temperatures through the heat exchanger can be predicted by solving the basic Navier-Stokes equation and energy equation using numerical methods.

引用

页码：391 / 408

页数：18

共 30 条

[1]

[Anonymous], 2003, Heat transfer handbook

[2] Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers [J].

Cui, X. ;

Chua, K. J. ;

Islam, M. R. ;

Yang, W. M. .

ENERGY CONVERSION AND MANAGEMENT, 2014, 88 :372-381

[3] The Effect of Piezoelectric Transducer Location on Heat Transfer Enhancement of an Ultrasonic-Assisted Liquid-Cooled CPU Radiator [J].

Delouei, A. Amiri ;

Sajjadi, H. ;

Ahmadi, G. .

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, 2024, 48 (01) :239-252

[4] An active approach to heat transfer enhancement in indirect heaters of city gate stations: An experimental modeling [J].

Delouei, Amin Amiri ;

Naeimi, Hooman ;

Sajjadi, Hassan ;

Atashafrooz, Meysam ;

Imanparast, Meysam ;

Chamkha, Ali J. .

APPLIED THERMAL ENGINEERING, 2024, 237

[5] Louvered Fin-and-Flat Tube Compact Heat Exchanger under Ultrasonic Excitation [J].

Delouei, Amin Amiri ;

Sajjadi, Hasan ;

Atashafrooz, Meysam ;

Hesari, Mohammad ;

Ben Hamida, Mohamed Bechir ;

Arabkoohsar, Ahmad .

FIRE-SWITZERLAND, 2023, 6 (01)

[6] Ultrasonic Vibration Technology to Improve the Thermal Performance of CPU Water-Cooling Systems: Experimental Investigation [J].

Delouei, Amin Amiri ;

Sajjadi, Hasan ;

Ahmadi, Goodarz .

WATER, 2022, 14 (24)

[7] The thermal effects of multi-walled carbon nanotube concentration on an ultrasonic vibrating finned tube heat exchanger [J].

Delouei, Amin Amiri ;

Atashafrooz, Meysam ;

Sajjadi, Hasan ;

Karimnejad, Sajjad .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2022, 135

[8] MODELING OF INDIRECT EVAPORATIVE AIR COOLERS [J].

ERENS, PJ ;

DREYER, AA .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1993, 36 (01) :17-26

[9] Optimization of ultrasonic-excited double-pipe heat exchanger with machine learning and PSO [J].

Esfandyari, Morteza ;

Delouei, Amin Amiri ;

Jalai, Ali .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2023, 147

[10] Going below the wet-bulb temperature by indirect evaporative cooling: Analysis using a modified ε-NTU method [J].

Hasan, Ala .

APPLIED ENERGY, 2012, 89 (01) :237-245

← 1 2 3 →