A quantitative method to assess and predict the exothermic behavior of steel slag blended cement

被引：21
作者：
Zhuang, Shiyu [1 ]
Wang, Qiang [1 ]
Luo, Ting [1 ]
机构：
[1] Tsinghua Univ, Dept Civil Engn, Beijing 100084, Peoples R China
来源：
CEMENT AND CONCRETE RESEARCH | 2024年 / 175卷
基金：
中国国家自然科学基金;
关键词：
Steel slag; Cement; Exothermic behavior; Heat release; Quantitative calculation; HYDRATION HEAT EVOLUTION; IN-SITU XRD; PORTLAND-CEMENT; FLY-ASH; TRICALCIUM SILICATE; SECONDARY COMPONENT; COMPOSITE BINDER; KINETICS; TEMPERATURE; FILLER;
D O I：
10.1016/j.cemconres.2023.107373
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Steel slag blended cement exhibits distinctive exothermic behaviors from cement or fly ash/blast furnace slag blended cement. However, quantitative assessment and prediction are difficult due to the complex interactions between steel slag and cement in time scale, especially at the time when it exceeds the measurement accuracy of isothermal calorimetry. In this study, a quantitative method was proposed to assess and predict the exothermic behavior of steel slag blended cement using both quantitative experiments and kinetic/thermodynamic simulations. Contributions of components in steel slag blended cement to the total exothermic behavior in time scale were quantitatively revealed, and exothermic behavior of steel slag blended cement was interpreted in-depth. Results show that heat release by C3S at 1 d decreases by approximately 40 % in steel slag blended cement. Compared with that on C3S, steel slag has small effects on the exothermic behaviors of other cement clinkers. Calculated results agree well with calorimetric results, and prediction of the exothermic behavior was achieved.
引用
收藏
页数：14
相关论文
共 81 条
[51]   Influence of curing temperature on the hydration and strength development of Class G Portland cement [J].
Pang, Xueyu ;
Sun, Lijun ;
Chen, Min ;
Xian, Ming ;
Cheng, Guodong ;
Liu, Yang ;
Qin, Jiankun .
CEMENT AND CONCRETE RESEARCH, 2022, 156
[52]   Cement hydration kinetics study in the temperature range from 15 °C to 95 °C [J].
Pang, Xueyu ;
Sun, Lijun ;
Sun, Fang ;
Zhang, Ge ;
Guo, Shenglai ;
Bu, Yuhuan .
CEMENT AND CONCRETE RESEARCH, 2021, 148
[53]  
Parrot L.J., 1984, Proc. Br. Ceram. Soc., V35, P41
[54]   Effects of stress during heating on strength and stiffness of concrete at elevated temperature [J].
Petkovski, M. .
CEMENT AND CONCRETE RESEARCH, 2010, 40 (12) :1744-1755
[55]   Cement hydration in the presence of high filler contents [J].
Poppe, AM ;
De Schutter, G .
CEMENT AND CONCRETE RESEARCH, 2005, 35 (12) :2290-2299
[56]  
Qijun Y., 1997, 10 INT C CHEM CEM, V10
[57]   Early hydration of SCM-blended Portland cements: A pore solution and isothermal calorimetry study [J].
Schoeler, Axel ;
Lothenbach, Barbara ;
Winnefeld, Frank ;
Ben Haha, Mohsen ;
Zajac, Maciej ;
Ludwig, Horst-Michael .
CEMENT AND CONCRETE RESEARCH, 2017, 93 :71-82
[58]   Advances in understanding hydration of Portland cement [J].
Scrivener, Karen L. ;
Juilland, Patrick ;
Monteiro, Paulo J. M. .
CEMENT AND CONCRETE RESEARCH, 2015, 78 :38-56
[59]   Characterization of ladle furnace basic slag for use as a construction material [J].
Setien, J. ;
Hernandez, D. ;
Gonzalez, J. J. .
CONSTRUCTION AND BUILDING MATERIALS, 2009, 23 (05) :1788-1794
[60]   Influence of mineral additives on the hydration characteristics of ordinary Portland cement [J].
Sharma, RL ;
Pandey, SP .
CEMENT AND CONCRETE RESEARCH, 1999, 29 (09) :1525-1529
123456789