A quantitative method to assess and predict the exothermic behavior of steel slag blended cement

被引:21
作者
Zhuang, Shiyu [1 ]
Wang, Qiang [1 ]
Luo, Ting [1 ]
机构
[1] Tsinghua Univ, Dept Civil Engn, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
Steel slag; Cement; Exothermic behavior; Heat release; Quantitative calculation; HYDRATION HEAT EVOLUTION; IN-SITU XRD; PORTLAND-CEMENT; FLY-ASH; TRICALCIUM SILICATE; SECONDARY COMPONENT; COMPOSITE BINDER; KINETICS; TEMPERATURE; FILLER;
D O I
10.1016/j.cemconres.2023.107373
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Steel slag blended cement exhibits distinctive exothermic behaviors from cement or fly ash/blast furnace slag blended cement. However, quantitative assessment and prediction are difficult due to the complex interactions between steel slag and cement in time scale, especially at the time when it exceeds the measurement accuracy of isothermal calorimetry. In this study, a quantitative method was proposed to assess and predict the exothermic behavior of steel slag blended cement using both quantitative experiments and kinetic/thermodynamic simulations. Contributions of components in steel slag blended cement to the total exothermic behavior in time scale were quantitatively revealed, and exothermic behavior of steel slag blended cement was interpreted in-depth. Results show that heat release by C3S at 1 d decreases by approximately 40 % in steel slag blended cement. Compared with that on C3S, steel slag has small effects on the exothermic behaviors of other cement clinkers. Calculated results agree well with calorimetric results, and prediction of the exothermic behavior was achieved.
引用
收藏
页数:14
相关论文
共 81 条
[1]   Quantification of the degree of reaction of fly ash [J].
Ben Haha, M. ;
De Weerdt, K. ;
Lothenbach, B. .
CEMENT AND CONCRETE RESEARCH, 2010, 40 (11) :1620-1629
[2]   Understanding the Filler Effect on the Nucleation and Growth of C-S-H [J].
Berodier, E. ;
Scrivener, K. .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (12) :3764-3773
[3]   ANALYSES OF THE AQUEOUS PHASE DURING EARLY C3S HYDRATION [J].
BROWN, PW ;
FRANZ, E ;
FROHNSDORFF, G ;
TAYLOR, HFW .
CEMENT AND CONCRETE RESEARCH, 1984, 14 (02) :257-262
[4]   Five year drying of high performance concretes: Effect of temperature and cement-type on shrinkage [J].
Brue, F. N. G. ;
Davy, C. A. ;
Burlion, N. ;
Skoczylas, F. ;
Bourbon, X. .
CEMENT AND CONCRETE RESEARCH, 2017, 99 :70-85
[5]   Residual stress-strain relationship for concrete after exposure to high temperatures [J].
Chang, Y. F. ;
Chen, Y. H. ;
Sheu, M. S. ;
Yao, G. C. .
CEMENT AND CONCRETE RESEARCH, 2006, 36 (10) :1999-2005
[6]   The mechanism of basic oxygen furnace steel slag retarding early-age hydration of Portland cement and mitigating approach towards higher utilization rate [J].
Chen, Lou ;
Wang, Hanyu ;
Zheng, Keren ;
Zhou, Jin ;
He, Fuqiang ;
Yuan, Qiang .
JOURNAL OF CLEANER PRODUCTION, 2022, 362
[7]  
Copeland L.E., 1960, Chemistry of Hydration of Portland Cement Chemistry of Cement, fourth International Symposium, Washington, DC, P429
[8]   Mineral admixtures in mortars - Quantification of the physical effects of inert materials on short-term hydration [J].
Cyr, M ;
Lawrence, P ;
Ringot, E .
CEMENT AND CONCRETE RESEARCH, 2005, 35 (04) :719-730
[9]   Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash [J].
De Weerdt, K. ;
Ben Haha, M. ;
Le Saout, G. ;
Kjellsen, K. O. ;
Justnes, H. ;
Lothenbach, B. .
CEMENT AND CONCRETE RESEARCH, 2011, 41 (03) :279-291
[10]   The influence of fly ash on the hydration of OPC within the first 44 h-A quantitative in situ XRD and heat flow calorimetry study [J].
Dittrich, S. ;
Neubauer, J. ;
Goetz-Neunhoeffer, F. .
CEMENT AND CONCRETE RESEARCH, 2014, 56 :129-138