A comparative study of the impact on combustion and emission characteristics of nanoparticle-based fuel additives in the internal combustion engine

被引：9

作者：

Gupta, Aveek ^{[1
]}

Kumar, Ravinder ^{[1
]}

Maurya, Ashish ^{[1
]}

Ahmadi, Mohammad H. ^{[2
]}

Ongar, Bulbul ^{[3
]}

Yegzekova, Anara ^{[4
]}

Sharma, Jeet Prakash ^{[1
]}

Kanchan, Sumit ^{[1
]}

Shelare, Sagar ^{[5
]}

机构：

[1] Lovely Profess Univ, Sch Mech Engn, Phagwara, Punjab, India

[2] Shahrood Univ Technol, Fac Mech Engn, Shahrood, Iran

[3] Satbayev Univ, Dept Power Engn, Alma Ata, Kazakhstan

[4] Logist & Transport Acad, Dept Power Engn, Alma Ata, Kazakhstan

[5] Priyadarshini Coll Engn, Mech Engn Dept, Nagpur, Maharashtra, India

来源：

ENERGY SCIENCE & ENGINEERING | 2024年 / 12卷 / 01期

关键词：

combustion characteristic; emission characteristic; internal combustion engine; nanoparticles; CERIUM OXIDE NANOPARTICLE; PONGAMIA METHYL-ESTER; DI DIESEL-ENGINE; CARBON NANOTUBES; PERFORMANCE-CHARACTERISTICS; GRAPHENE NANOPLATELET; NANO-PARTICLES; BIODIESEL; INJECTION; BLENDS;

D O I：

10.1002/ese3.1614

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The search for an effective solution to improve performance and emission characteristics of internal combustion (IC) engines used in the commercial sector is regarded as one of the most important and essential issues in recent years due to increasing levels of pollution. Nanoparticles with their additive ability to increase fuel reactivity and atomization, due to their large surface area and high heat transfer coefficient, can improve the performance and emission characteristics of a fuel. This review highlights the use of nanoparticles as fuel additives to enhance the emission and performance characteristics of IC engines. Detailed comparisons of performance, emission, and combustion characteristics of IC engines using fuels blended with nanoparticles have been done. Nanoparticles were observed to be an oxygen buffer for fuel combustion and boost fuel atomization, thus enhancing engine performance. While alumina exhibited a decrease in levels of HC and CO but a considerable increase in NOx, graphene nanoparticles and ceria were found to be particularly effective in enhancing engine performance. Detailed study has been done on other nanoparticles, including metal-oxide, nonmetal-oxide as well as carbon nanoparticles. Overall, the use of nanoparticles can enhance the thermophysical characteristics of fuels, improving the emission and performance characteristics of engines. The review suggests that selecting the right dosage and variety of nanoparticles is crucial for optimizing engine performance, and thus directly helps in tackling the ongoing pollution problem. Methodology and results overview: With the purpose of enhancing the efficiency and reducing the emissions of an internal combustion engine, the paper studies various nanoadditives that are used with the conventional fuel. From the analysis of the data available, it was observed that graphene and ceria demonstrated significant improvement in the performance characteristics. The addition of alumina resulted in the reduction of hydrocarbon and carbon monoxide emissions, but elevated nitrogen oxides.image

引用

页码：284 / 303

页数：20

共 99 条

[11] An experimental investigation in a diesel engine using carbon nanotubes blended water-diesel emulsion fuel [J].

Basha, J. Sadhik ;

Anand, R. B. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2011, 225 (A3) :279-288

[12] Optimizing the thermophysical properties and combustion performance of biodiesel by graphite and reduced graphene oxide nanoparticle fuel additive [J].

Bayindirli, Cihan ;

Celik, Mehmet ;

Zan, Recep .

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2023, 37

[13]

Bitire SO, 2022, S AFR J CHEM ENG, V41, P161, DOI [10.1016/j.sajce.2022.06.007, 10.1016/j.sajce.2022.06.007]

[14]

Cele T., 2020, PREPARATION NANOPART, P1

[15] Comparative evaluation of graphene oxide and graphene nanoplatelets as fuel additives on the combustion and emission characteristics of a diesel engine fuelled with diesel and biodiesel blend [J].

Chacko, Nivin ;

Jeyaseelan, Thangaraja .

FUEL PROCESSING TECHNOLOGY, 2020, 204

[16]

Chatur MG, 2023, MATER TODAY-PROC, DOI [10.1016/j.matpr.2023.01.305, 10.1016/j.matpr.2023.01.305, DOI 10.1016/J.MATPR.2023.01.305]

[17] The impact of adding nano-Al2O3 and nano-ZnO to Iraqi diesel fuel in terms of compression ignition engines' performance and emitted pollutants [J].

Dhahad, Hayder A. ;

Chaichan, Miqdam T. .

THERMAL SCIENCE AND ENGINEERING PROGRESS, 2020, 18

[18] A study on performance, combustion and emission behaviour of diesel engine powered by novel nano nerium oleander biofuel [J].

Dhinesh, B. ;

Annamalai, M. .

JOURNAL OF CLEANER PRODUCTION, 2018, 196 :74-83

[19] Effects of diesel-biodiesel fuel blends doped with zinc oxide nanoparticles on performance and combustion attributes of a diesel engine [J].

El-Adawy, Mohammed .

ALEXANDRIA ENGINEERING JOURNAL, 2023, 80 :269-281

[20] Investigation of the effect of adding graphene oxide, graphene nanoplatelet, and multiwalled carbon nanotube additives with n-butanol-Jatropha methyl ester on a diesel engine performance [J].

El-Seesy, Ahmed I. ;

Hassan, Hamdy .

RENEWABLE ENERGY, 2019, 132 :558-574

← 1 2 3 4 5 6 7 8 9 10 →