Effect of ultrasonic vibration on microstructural evolution, clad defects, and surface properties in laser direct energy deposition of Inconel 625

Laser direct energy deposition (DED) has some accompanying issues, such as existence of micropores, elemental segregation at grain boundaries, intergranular corrosion, etc. Therefore, the current work aims for a reduction in clad defects and enhancement in surface properties for laser direct deposition of Inconel 625 by implementing ultrasonic vibration. The acoustic streaming and cavitation effect induced by ultrasonic vibration results in the breaking of columnar grains, along with grain refinement and better elemental distribution in the matrix during the solidification process. The investigation is carried out for deposition using a 240 W Yb-fiber laser under the application of ultrasonic vibration with a variable amplitude of 6-13 mu m (frequency: 33-28 kHz). A relatively higher vibration amplitude was found more efficient in converting long columnar grains into finer and uniformly distributed equiaxed grains, with a significant reduction in micropores. Further, it resulted in a shorter molten pool lifetime because of the generation of more nucleation centers, leading to better cooling. The above effects resulted in higher microhardness of the deposited layer. Further, the wear and corrosion resistance showed an improvement with the application of vibration, which may be due to the finer equiaxed grains, less porosity, and better elemental distribution at a higher vibration amplitude.