The Effect of Grouping Output Parameters by Quality Characteristics on the Predictive Performance of Artificial Neural Networks in Injection Molding Process

被引:0
作者
Lee, Junhan [1 ]
Kim, Jongsun [1 ]
Kim, Jongsu [1 ]
机构
[1] Korea Inst Ind Technol, Molding & Met Forming R&D Dept, Bucheon 14442, South Korea
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 23期
关键词
injection molding; artificial neural network (ANN); Multi-input multi-output (MIMO); multi-task learning; quality prediction; OPTIMIZATION;
D O I
10.3390/app132312876
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In this study, a multi-input, multi-output-based artificial neural network (ANN) was constructed by classifying output parameters into different groups, considering the physical meanings and characteristics of product quality factors in the injection molding process. Injection molding experiments were conducted for bowl products, and a dataset was established. Based on this dataset, an ANN model was developed to predict the quality of molded products. The input parameters included melt temperature, mold temperature, packing pressure, packing time, and cooling time. The output parameters included mass, diameter, and height of the molded product. The output parameters were divided into two cases. In one case, diameter, and height, representing length, were grouped together, while mass was organized into a separate group. In the other case, mass, diameter and height were separated individually and applied to the ANN. A multi-task learning method was used to group the output parameters. The performance of the two constructed multi-task learning-based ANNs was compared with that of the conventional ANN where the output parameters were not separated and applied to a single layer. The comparative results showed that the multi-task learning architecture, which grouped the output parameters considering the physical meaning and characteristics of the quality of molded products, exhibited an improved prediction performance of about 32.8% based on the RMSE values.
引用
收藏
页数:16
相关论文
共 17 条
[1]  
Aggarwal C.C., 2018, NEURAL NETWORKS DEEP
[2]  
[Anonymous], 2018, ISO 20457:2018
[3]   Multitask learning [J].
Caruana, R .
MACHINE LEARNING, 1997, 28 (01) :41-75
[4]   Modeling and Optimization of the Injection-Molding Process: A Review [J].
Fernandes, Celio ;
Pontes, Antonio Jose ;
Viana, Julio Cesar ;
Gaspar-Cunha, Antonio .
ADVANCES IN POLYMER TECHNOLOGY, 2018, 37 (02) :429-449
[5]  
Goodfellow I., 2017, ADAPTIVE COMPUTATION
[6]   Comparison of design of experiment methods for modeling injection molding experiments using artificial neural networks [J].
Heinisch, Julian ;
Lockner, Yannik ;
Hopmann, Christian .
JOURNAL OF MANUFACTURING PROCESSES, 2021, 61 :357-368
[7]  
Kingma DP, 2014, ADV NEUR IN, V27
[8]   Effects of Input Parameter Range on the Accuracy of Artificial Neural Network Prediction for the Injection Molding Process [J].
Lee, Junhan ;
Yang, Dongcheol ;
Yoon, Kyunghwan ;
Kim, Jongsun .
POLYMERS, 2022, 14 (09)
[9]  
Li LS, 2018, J MACH LEARN RES, V18
[10]   Multi-Task Learning for Multi-Dimensional Regression: Application to Luminescence Sensing [J].
Michelucci, Umberto ;
Venturini, Francesca .
APPLIED SCIENCES-BASEL, 2019, 9 (22)