Revealing corrosion parameters of steel in alkali-activated materials

被引:20
作者
Runci, Antonino [1 ]
Provis, John L. [2 ]
Serdar, Marijana [1 ,2 ]
机构
[1] Univ Zagreb, Fac Civil Engn, Dept Mat, Zagreb, Croatia
[2] Univ Sheffield, Dept Mat Sci & Engn, Sheffield, England
基金
欧盟地平线“2020”;
关键词
Alkali -activated material; Corrosion; Chloride; EIS; Tafel; CHLORIDE-INDUCED CORROSION; POLARIZATION RESISTANCE; REINFORCING STEEL; FLY-ASH; ELECTROCHEMICAL TECHNIQUES; PORE SOLUTION; CARBON-STEEL; BAR SAMPLES; CONCRETE; BEHAVIOR;
D O I
10.1016/j.corsci.2022.110849
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The long-term corrosion behaviour of reinforcing steel embedded in alkali-activated mortars (AAMs) prepared with three different binder compositions was monitored over a 360-day period by cyclic wetting/drying and spraying with chloride solution. Corrosion potential and polarisation resistance were determined by linear polarisation, individual resistance of mortar and steel by electrochemical impedance spectroscopy, and Tafel slopes by potentiodynamic anodic polarisation. The results were validated by correlating the electrochemical mass losses with the gravimetric mass losses. Based on the time evolution of the corrosion parameters, the study proposes new limits for passive and active corrosion conditions for reinforcing steel in AAMs.
引用
收藏
页数:14
相关论文
共 70 条
  • [1] Electrochemical behaviour of steel rebars in concrete:: influence of environmental factors and cement chemistry
    Andrade, C
    Keddam, M
    Nóvoa, XR
    Pérez, MC
    Rangel, CM
    Takenouti, H
    [J]. ELECTROCHIMICA ACTA, 2001, 46 (24-25) : 3905 - 3912
  • [2] COVER CRACKING AS A FUNCTION OF BAR CORROSION .1. EXPERIMENTAL TEST
    ANDRADE, C
    ALONSO, C
    MOLINA, FJ
    [J]. MATERIALS AND STRUCTURES, 1993, 26 (162): : 453 - 464
  • [3] Corrosion rate monitoring in the laboratory and on-site
    Andrade, C
    Alonso, C
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 1996, 10 (05) : 315 - 328
  • [4] Andrade C, 2017, J STRUCT INTEGR MAIN, V2, P200, DOI 10.1080/24705314.2017.1388693
  • [5] Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method
    Andrade, C
    Alonso, C
    Gulikers, J
    Polder, R
    Cigna, R
    Vennesland, O
    Salta, M
    Raharinaivo, A
    Elsener, B
    [J]. MATERIALS AND STRUCTURES, 2004, 37 (273) : 623 - 643
  • [6] QUANTITATIVE MEASUREMENTS OF CORROSION RATE OF REINFORCING STEELS EMBEDDED IN CONCRETE USING POLARIZATION RESISTANCE MEASUREMENTS
    ANDRADE, C
    GONZALEZ, JA
    [J]. WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1978, 29 (08): : 515 - 519
  • [7] Andrade C., 2018, REV ALCONPAT INT, V8, P264, DOI [10.21041/ra.v8i3.349, DOI 10.21041/RA.V8I3.349]
  • [8] Critical chloride content in reinforced concrete - A review
    Angst, Ueli
    Elsener, Bernhard
    Larsen, Claus K.
    Vennesland, Oystein
    [J]. CEMENT AND CONCRETE RESEARCH, 2009, 39 (12) : 1122 - 1138
  • [9] Beyond the chloride threshold concept for predicting corrosion of steel in concrete
    Angst, Ueli M.
    Isgor, O. Burkan
    Hansson, Carolyn M.
    Sagues, Alberto
    Geiker, Mette Rika
    [J]. APPLIED PHYSICS REVIEWS, 2022, 9 (01)
  • [10] The effect of the steel-concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI
    Angst, Ueli M.
    Geiker, Mette R.
    Alonso, Maria Cruz
    Polder, Rob
    Isgor, O. Burkan
    Elsener, Bernhard
    Wong, Hong
    Michel, Alexander
    Hornbostel, Karla
    Gehlen, Christoph
    Francois, Raoul
    Sanchez, Mercedes
    Criado, Maria
    Sorensen, Henrik
    Hansson, Carolyn
    Pillai, Radhakrishna
    Mundra, Shishir
    Gulikers, Joost
    Raupach, Michael
    Pacheco, Jose
    Sagues, Alberto
    [J]. MATERIALS AND STRUCTURES, 2019, 52 (04)