Effect of sizing agents on tensile properties of carbon fiber filament wound structures

被引：5
作者：
Zhang, Shubin [1 ,2 ]
Gu, Hongxing [1 ,2 ]
Zhao, Ming [1 ]
Xie, Huaiqin [2 ]
Huang, Yudong [2 ]
机构：
[1] Jiangsu Hengshen Co Ltd, Tonggang Rd 777, Danyang 212314, Jiangsu, Peoples R China
[2] Harbin Inst Technol, Sch Chem & Chem Engn, Harbin, Peoples R China
来源：
JOURNAL OF ENGINEERED FIBERS AND FABRICS | 2024年 / 19卷
关键词：
Carbon fiber; sizing agent; filament winding; strength loss; NOL ring; INTERFACIAL PROPERTIES; SURFACE; COMPOSITE; RESIN; OPTIMIZATION;
D O I：
10.1177/15589250231183159
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
In order to evaluate the effects of sizing agents on the wettability, strength loss, and properties of final filament wound structures during filament winding of carbon fibers, three types of sizing agent based on epoxy, epoxy + polyester, and epoxy + polyurethane were used to treat carbon fibers, the surface properties of carbon fiber samples after treatment were evaluated using SEM, infrared spectroscopy, dynamic contact angle analysis, and interlaminar shear strength (ILSS) test, the strength loss caused by fiber damage during filament winding was quantitatively analyzed, and the strength properties of the filament wound structures were characterized by NOL ring test. The results showed that the sizing agent treatment only slightly improved the surface free energy and ILSS of carbon fibers, but it had obvious influence on the strength loss rate of carbon fiber bundles. Added polyester or polyurethane in epoxy-based sizing may improve its protective effect for carbon fiber, and thus decrease strength loss during winding process, result in better tensile properties of carbon fiber filament wound structures.
引用
收藏
页数：8
相关论文
共 30 条
[1]   High-density automotive hydrogen storage with cryogenic capable pressure vessels [J].
Aceves, Salvador M. ;
Espinosa-Loza, Francisco ;
Ledesma-Orozco, Elias ;
Ross, Timothy O. ;
Weisberg, Andrew H. ;
Brunner, Tobias C. ;
Kircher, Oliver .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (03) :1219-1226
[2]   Modeling and Differential Evolution Optimization of PAN Carbon Fiber Production Process [J].
Badrnezhad, Ramin ;
Eslami-Farsani, Reza .
FIBERS AND POLYMERS, 2014, 15 (06) :1182-1189
[3]   Effects of Styrene-Acrylic Sizing on the Mechanical Properties of Carbon Fiber Thermoplastic Towpregs and Their Composites [J].
Bowman, Sean ;
Jiang, Qiuran ;
Memon, Hafeezullah ;
Qiu, Yiping ;
Liu, Wanshuang ;
Wei, Yi .
MOLECULES, 2018, 23 (03)
[4]   Experimental Characterization of CFRP by NOL Ring Test [J].
Charan, V. SaiSri ;
Vardhan, A. Vishnu ;
Raj, Sai ;
Rao, G. Rama ;
Rao, G. V. ;
Hussaini, S. M. .
MATERIALS TODAY-PROCEEDINGS, 2019, 18 :2868-2874
[5]   Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites [J].
Chen, Weiming ;
Yu, Yunhua ;
Li, Peng ;
Wang, Chengzhong ;
Zhou, Tongyue ;
Yang, Xiaoping .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (11-12) :2261-2270
[6]   Influence of filament winding parameters on composite vessel quality and strength [J].
Cohen, D .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (12) :1035-1047
[7]   Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion [J].
Dai, Zhishuang ;
Shi, Fenghui ;
Zhang, Baoyan ;
Li, Min ;
Zhang, Zuoguang .
APPLIED SURFACE SCIENCE, 2011, 257 (15) :6980-6985
[8]   Modeling and Optimization of Carbon Fiber Processing: A RSM-FCCC Experimental Design Approach [J].
Eslami-Farsani, Reza .
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, 2015, 52 (01) :69-75
[9]   Mixed resin and carbon fibres surface treatment for preparation of carbon fibres composites with good interfacial bonding strength [J].
He, Hongwei ;
Wang, Jianlong ;
Li, Kaixi ;
Wang, Jian ;
Gu, Jianyu .
MATERIALS & DESIGN, 2010, 31 (10) :4631-4637
[10]   THE CARBON-FIBER EPOXY INTERFACE - A REVIEW [J].
HUGHES, JDH .
COMPOSITES SCIENCE AND TECHNOLOGY, 1991, 41 (01) :13-45
123