Development of friction factor and heat transfer correlation of liquid metal flow in helical tube bundles

被引：4

作者：

Shen, Cong ^{[1
]}

Liu, Maolong ^{[2
]}

Liu, Limin ^{[1
]}

Xu, Ziyi ^{[1
]}

Zeng, Chen ^{[1
]}

Liu, Li ^{[1
]}

Gu, Hanyang ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Nucl Sci & Engn, Shanghai 200240, Peoples R China

[2] Fudan Univ, Inst Modern Phys, Shanghai 200433, Peoples R China

来源：

ANNALS OF NUCLEAR ENERGY | 2024年 / 201卷

关键词：

Liquid metal H-OTSG; Numerical simulation; Resistance coefficient; Nusselt number; SHELL-SIDE; PRESSURE-DROP; CROSS-FLOW;

D O I：

10.1016/j.anucene.2024.110442

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

There are currently few friction factor and heat transfer correlations for liquid metal flow in the shell-side of helical-coiled once-through steam generators (H-OTSG). The flow and heat transfer characteristics in H-OTSG are affected by various configuration parameters. Therefore, it is crucial to develop friction factor and Nusselt number correlations for the preliminary design of liquid metal H-OTSG. In this study, a numerical method is proposed to investigate the resistance and heat transfer characteristics of liquid metal crossflow through helical tube bundles. The effects of the coiling strategy and tube pitch on the resistance and heat transfer are analyzed in detail based on the validated numerical method. New correlations for friction factor and Nusselt number are developed based on the numerical results. This study will provide a reference for the design and safety analysis of liquid metal H-OTSG.

引用

页数：12

共 34 条

[1] Procedure for estimation and reporting of uncertainty due to discretization in CFD applications [J].

Celik, Ishmail B. ;

Ghia, Urmila ;

Roache, Patrick J. ;

Freitas, Christopher J. .

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2008, 130 (07) :0780011-0780014

[2]

Cess R.D., 1958, J FLUIDS ENG, V80, P677

[3]

DWYER OE, 1966, ATOM ENERGY REV, V4, P3

[4]

Fazio C., 2015, Handbook on lead-bismuth eutectic alloy and lead properties, materials compatibility, thermal-hydraulics and technologies-2015 edition

[5]

Gao W., 2021, J. Phys.: Conf. Series

[6] Heat transfer characteristics of carbon dioxide cross flow over tube bundles at supercritical pressures [J].

Gao, Weikai ;

Zhao, Jiaqing ;

Li, Xiaowei ;

Zhao, Houjian ;

Zhang, Yiyang ;

Wu, Xinxin .

APPLIED THERMAL ENGINEERING, 2019, 158

[7] Research on the shell-side thermal performances of heat exchangers with helical tube coils [J].

Genic, Srbislav B. ;

Jacimovic, Branislav M. ;

Jaric, Marko S. ;

Budimir, Nikola J. ;

Dobrnjac, Mirko M. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (15-16) :4295-4300

[8] HEAT TRANSFER AND PRESSURE DROP FOR CROSS FLOW THROUGH BANKS OF MULTISTART HELICAL TUBES WITH UNIFORM INCLINATIONS AND UNIFORM LONGITUDINAL PITCHES [J].

GILLI, PV .

NUCLEAR SCIENCE AND ENGINEERING, 1965, 22 (03) :298-&

[9]

Groehn H., 1988, Influence of the yaw angle on heat transfer and pressure drop of helical type heat exchangers

[10]

Groehn H., 1982, INT HEAT TRANSFER C

← 1 2 3 4 →