The corelation between creep resistance and microstructure in AA6111 alloy strengthened by synergistic Er, Zr addition

被引：15
作者：
Qian, Wei [1 ]
Kai, Xizhou [1 ]
Tao, Ran [1 ]
Gao, Xu [1 ]
Huang, Luyao [1 ]
Zhao, Yutao [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2023年 / 870卷
基金：
中国博士后科学基金;
关键词：
Al 3 (Er; Zr) precipitates; Core-shell structure; Thermal stability; Microstructure; Dislocations; Creep performance; PRECIPITATION EVOLUTION; ALUMINUM; BEHAVIOR;
D O I：
10.1016/j.msea.2023.144867
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research work, the creep behavior of AA6111 alloy strengthened by Er, Zr microalloying was investigated at 473-573 K/70-90 MPa. The results showed that the improvement on creep resistance induced by synergistic Er, Zr addition was better than the only Er addition, which can be attributed to the formation of Ll2-ordered Al3(Er, Zr) precipitates with special core-shell structure. The outer shell composed of slowing-diffusing Zr could act as a diffusion barrier, decreasing the coarsening rate and maintaining the thermal stability of Al3(Er, Zr) nanoprecipitates at high temperature. Thus, these nanosized Al3(Er, Zr) precipitates could hinder the movement of dislocations as well as pin grain boundaries effectively during creep process. Besides, coarse intermetallics embedded on grain boundaries were also refined to tiny pieces assisted by Er, Zr modification, which is an important reason for such prominent creep performance. Based on the modified power-law equation, the true stress exponents for all experimental alloys were measured to be 5, indicating the creep deformation was dominated by dislocation climbing mechanism.
引用
收藏
页数：9
相关论文
共 43 条
[1]   Effect of grain-boundary θ-Al2Cu precipitates on tensile and compressive creep properties of cast Al-Cu-Mn-Zr alloys [J].
Bahl, Sumit ;
Rakhmonov, Jovid U. ;
Kenel, Christoph ;
Dunand, David C. ;
Shyam, Amit .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 840
[2]   The interplay of precipitation of ordered compounds and interfacial segregation in Al-Cu-Hf-Si alloys for high-temperature strength [J].
Bansal, Ujjval ;
Singh, Mahander Pratap ;
Mondol, Sukla ;
Sinha, Shyam Kanta ;
Makineni, Surendra Kumar ;
Paul, Aloke ;
Chattopadhyay, Kamanio .
ACTA MATERIALIA, 2022, 240
[3]   Strengthening retention and structural stability of the Al-Al3Ni eutectic at high temperatures [J].
Czerwinski, Frank ;
Aniolek, Marta ;
Li, Jian .
SCRIPTA MATERIALIA, 2022, 214
[4]   Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys [J].
De Luca, Anthony ;
Seidman, David N. ;
Dunand, David C. .
ACTA MATERIALIA, 2019, 165 :1-14
[5]   Microstructure and mechanical properties of cast Al-Ce-Sc-Zr-(Er) alloys strengthened by Al11 Ce3 micro-platelets and L12 Al3(Sc,Zr,Er) nano-precipitates [J].
Ekaputra, Clement N. ;
Rakhmonov, Jovid U. ;
Weiss, David ;
Mogonye, Jon-Erik ;
Dunand, David C. .
ACTA MATERIALIA, 2022, 240
[6]   Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al-Mg-Si alloy AA 6016 [J].
Engler, O. ;
Marioara, C. D. ;
Aruga, Y. ;
Kozuka, M. ;
Myhr, O. R. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 759 :520-529
[7]   Solute-induced strengthening during creep of an aged-hardened Al-Mn-Zr alloy [J].
Farkoosh, Amir R. ;
Dunand, David C. ;
Seidman, David N. .
ACTA MATERIALIA, 2021, 219
[8]   Tailoring precipitation strategy to optimize microstructural evolution, aging hardening and creep resistance in an Al-Cu-Sc alloy by isochronal aging [J].
Gao, Y. H. ;
Kuang, J. ;
Zhang, J. Y. ;
Liu, G. ;
Sun, J. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 795
[9]   Effects of Ytterbium and Zirconium on precipitation evolution and coarsening resistance in aluminum during isothermal aging [J].
Gao, Zhaohe ;
Li, Hongying ;
Liu, Jiaojiao ;
Lu, Xiaochao ;
Ou, Yangxun .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 592 :100-104
[10]   Dispersoid characteristics and elevated temperature creep resistance of Al-Si-Mg cast alloy with Zr addition [J].
Huang, Huilan ;
Li, Wang ;
Hu, Chuanbo ;
Ding, Lipeng ;
Jia, Zhihong ;
Zhou, Nan .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 836
12345