Atomic Origins of Enhanced Ferroelectricity in Nanocolumnar PbTiO3/PbO Composite Thin Films

Nanocomposite films hold great promise for multifunctional devices by integrating different functionalities within a single film. The microstructure of the precipitate/secondary phase is an essential element in designing composites' properties. The interphase strain between the matrix and secondary phase is responsible for strain-mediated functionalities, such as magnetoelectric coupling and ferroelectricity. However, a quantitative microstructure-dependent interphase strain characterization has been scarcely studied. Here, it is demonstrated that the PbTiO3(PTO)/PbO composite system can be prepared in nano-spherical and nanocolumnar configurations by tuning the misfit strain, confirmed by a three-dimensional reconstructive microscopy technique. With the atomic resolution quantitative microscopy with a depth resolution of a few nanometers, it is discovered that the strained region in PTO is much larger and more uniform in nanocolumnar compared to nano-spherical composites, resulting in much enhanced ferroelectric properties. The interphase strain between PbO and PTO in the nanocolumnar structure leads to a giant c/a ratio of 1.20 (bulk value of 1.06), accompanied by a Ti polarization displacement of 0.48 angstrom and an effective ferroelectric polarization of 241.7 mu C cm(-2), three times compared to the bulk value. The quantitative atomic-scale strain and polarization analysis on the interphase strain provides an important guideline for designing ferroelectric nanocomposites.