Formation characteristics and properties of an explosion-welded steel-aluminum composite with a diffusion barrier

被引：3
作者：
Kuz'min, V. I. [1 ]
Lysak, V. I. [1 ]
Kuz'min, S. V. [1 ]
Kuz'min, E. V. [1 ]
机构：
[1] Volgograd State Tech Univ, Dept Equipment & Technol Welding Prod, Volgograd, Russia
来源：
COMPOSITE INTERFACES | 2024年 / 31卷 / 02期
基金：
俄罗斯科学基金会;
关键词：
diffusion barrier; explosive welding; composite; interlayer; deformation; energy; STAINLESS-STEEL; MECHANICAL-PROPERTIES; TRANSITION JOINTS; HEAT-TREATMENT; INTERLAYER; ALLOY; MICROSTRUCTURE; INTERFACE;
D O I：
10.1080/09276440.2023.2248767
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
This paper presents a study of the formation characteristics and properties of an explosion-welded steel - aluminum composite with a chromium layer diffusion barrier. The identified characteristics of joint formation allowed us to determine the weldability range of the steel - aluminum composite with a diffusion barrier and define the optimal ranges of the explosion welding parameters. The chromium layer thickness, impact velocity, and plastic deformation energy significantly affect the magnitude and characteristics of plastic deformation during explosion welding of the steel - aluminum composite with a diffusion barrier. Thus, the steel - aluminum composite with a diffusion barrier has a higher strength and better quality than the aluminum - steel bimetal.
引用
收藏
页码：215 / 238
页数：24
相关论文
共 53 条
  • [1] An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel
    Acarer, Mustafa
    Demir, Bilge
    [J]. MATERIALS LETTERS, 2008, 62 (25) : 4158 - 4160
  • [2] Comparison of Cu, Ti and Ta interlayer explosively fabricated aluminum to stainless steel transition joints for cryogenic pressurized hydrogen storage
    Aceves, Salvador M.
    Espinosa-Loza, Francisco
    Elmer, John W.
    Huber, Robert
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (03) : 1490 - 1503
  • [3] Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties
    Akramifard, H. R.
    Mirzadeh, H.
    Parsa, M. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 613 : 232 - 239
  • [4] Welding of Aluminum Alloys to Steels: An Overview
    Atabaki, M. Mazar
    Nikodinovski, M.
    Chenier, P.
    Ma, J.
    Harooni, M.
    Kovacevic, R.
    [J]. JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2014, 14 (02) : 59 - 78
  • [5] Banker J, 2002, LIGHT MET, P439
  • [6] Banker J., 2009, Paton Weld J, V11, P42
  • [7] High Plastic Deformations and High Cooling Rates at the Interface of Explosion-Welded Materials
    Bataev, I. A.
    Ivanov, I. V.
    Malyutina, Yu. N.
    Emurlaev, K. I.
    Emurlaeva, Yu. Yu.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2019, 60 (9-10) : 674 - 679
  • [8] Fatigue properties of steel to aluminum transition joints produced by explosion welding
    Becker, Nicolas
    Gauthier, David
    Vidal, Edgar E.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2020, 139
  • [9] Copper plating on bonding properties of aluminium/steel explosive welded composite plate
    Bi, Zhixiong
    Li, Xuejiao
    Yang, Ke
    Wang, Quan
    Kai, Rong
    Dai, Xiande
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (03) : 392 - 402
  • [10] Plastic Deformation in Mesocomposite Materials under Dynamic Loading as Applied to Their Joining with Metals
    Bondar, M. P.
    Dmitriev, A. I.
    [J]. PHYSICAL MESOMECHANICS, 2016, 19 (04) : 420 - 429
123456