Surface Characterization, Mechanical Properties, and Corrosion Behavior of Zn-Ni Alloy Coated Steel Using Electroplating-Hot-Dip Galvanizing

被引:0
作者
Raghebi, Zahra [1 ]
Ahmadi, Nagi Parvini [1 ]
Khosroshahi, Rasul Azari [1 ]
Jafari, Robabeh [2 ]
机构
[1] Sahand Univ Technol, Dept Mat Sci Engn, Tabriz 513351996, Iran
[2] Urmia Univ, Fac Engn, Dept Mat Engn, Orumiyeh 5756151818, Iran
关键词
corrosion; hot-dip galvanizing; interface; interlayer; zinc-nickel alloy coating; INTERFACIAL LAYER FORMATION; ZINC; COATINGS; RESISTANCE; NICKEL; MICROSTRUCTURE; PRETREATMENT; PERFORMANCE; DEPOSITION; MORPHOLOGY;
D O I
10.5006/4290
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, the processing of zinc-nickel alloys with an electroplated nickel layer as the first layer followed by hot-dip galvanizing on plain carbon steel (St37) is investigated. The effect of the nickel layer and the effect of the immersion time on the alloy layers of the coating obtained by this method are studied. In addition, some properties of the obtained coating, such as the overall thickness, hardness, surface uniformity, coating adhesion strength, and corrosion resistance, were investigated using the optical microscope, scanning electron microscopy, energy dispersive x-ray spectrometer analysis, and potentiostat. The results show that the 16-min immersion time is the optimum galvanizing time at which an alloy with a nickel content of 0.11 wt% is formed and that the overall thickness of the galvanized sheet, especially the alloy layers, decreases compared to the pure zinc sheet. In addition, a more ductile, corrosion-resistant, and smoother surface is obtained.
引用
收藏
页码:1431 / 1442
页数:12
相关论文
共 52 条
[1]  
Abeln B., 2023, Int. J. Adv. Manuf. Technol, V125, P5197
[2]   Physicochemical and cytotoxicity studies of a novel hydrogel nanoclay EPD coating on titanium made of chitosan/gelatin/halloysite for biomedical applications [J].
Alipal, J. ;
Saidin, S. ;
Abdullah, H. Z. ;
Idris, M. I. ;
Lee, T. C. .
MATERIALS CHEMISTRY AND PHYSICS, 2022, 290
[3]   Investigations on corrosion proceeding path and EIS of Ni-ZrO2 composite coating [J].
Arghavanian, R. ;
Ahmadi, N. Parvini ;
Yazdani, S. ;
Bostani, B. .
SURFACE ENGINEERING, 2012, 28 (07) :508-512
[4]   On texture, corrosion resistance and morphology of hot-dip galvanized zinc coatings [J].
Asgari, H. ;
Toroghinejad, M. R. ;
Golozar, M. A. .
APPLIED SURFACE SCIENCE, 2007, 253 (16) :6769-6777
[5]   Adhesively bonded joints in composite materials: an overview [J].
Banea, M. D. ;
da Silva, L. F. M. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2009, 223 (L1) :1-18
[6]   Effect of NiCl2-Based Fluxes on Interfacial Layer Formation of Hot Dip Galvanized Steels [J].
Boonyongmaneerat, Yuttanant ;
Saengkiettiyut, Kanokwan ;
Rattanawaleedirojn, Pranee ;
Angkaprasert, Charttanong ;
Wanichsampan, Jumpot ;
Saenapitak, Sawalee .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (08) :74-78
[7]   Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview [J].
Budzik, Michal K. ;
Wolfahrt, Markus ;
Reis, Paulo ;
Kozlowski, Marcin ;
Sena-Cruz, Jose ;
Papadakis, Loucas ;
Nasr Saleh, Mohamed ;
Machalicka, Klara V. ;
Teixeira de Freitas, Sofia ;
Vassilopoulos, Anastasios P. .
JOURNAL OF ADHESION, 2022, 98 (14) :2133-2209
[8]   Improvement in hot dip galvanized coating microstructure and properties by pre-metallic deposition on steel surface: A comprehensive review [J].
Chakraborty, Anindita ;
Ghosh, Rishav ;
Sudan, Munish ;
Mondal, Avik .
SURFACE & COATINGS TECHNOLOGY, 2022, 449
[9]   Influence of Ni-electrodeposited pretreatment on galvanized coatings of reactive steels [J].
Che, Chunshan ;
Lu, Jingtang ;
Kong, Gang ;
Xu, Qiaoyu ;
Sui, Runzhon .
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2007, 22 (02) :221-224
[10]   Morphology and kinetics of interfacial layer formation during continuous hot-dip galvanizing and galvannealing [J].
Chen, L. ;
Fourmentin, R. ;
Mc Dermid, J. R. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (09) :2128-2142