Influence of hydrogen blending on the operation of natural gas pipeline network considering the compressor power optimization

Blending hydrogen into the existing natural gas pipeline network is regarded as the most potential transportation mode on the utility -scale. However, the impact of hydrogen on the operation performance of the pipeline remained unclear. This paper analyzes the economic and environmental performance of natural gas pipeline under different hydrogen blending ratios and different hydraulic boundary conditions. In order to reduce the operation costs and carbon emissions in each condition, this paper establish a non-linear optimization model to get the new operation plan of the pipeline system. Further, in order to characterize different boundary conditions of the system, four scenarios, namely, the baseline scenario (BS), the setpoint of flow rate scenario (SF), the setpoint of pressure (SP), and the setpoint of heat flow rate (SH) are proposed in this paper. Two studied cases demonstrated that: (1) the original compressor for natural gas can adapt to a hydrogen blending without change the type of compressor. (2) The optimization model has significant potential in reducing the economic cost and carbon emissions of the system with an average decrease of 11.48%. (3) For every 1% of hydrogen added, the annual operating cost of the system is reduced by $0.73 million (3.29%) in SF, 0.017 million (0.08%) in SP, or increased by $1.67 million (7.50%) in SH. Moreover, the annual carbon emission is reduced by 0.38 kt (3.53%) in SF, 0.047 kt (0.44%) in SP, or increased by 0.76 kt (7.14%) in SH. However, when the hydrogen mixing ratio is more than 8%, the contrary trend may occur. (4) The maximum blending ratio at different points of the multisource pipeline network are physically interdependent. The paper proposed an optimization model for the 2-E analysis of the pipeline and can provide theoretical guidance for the further application of this transportation mode.