Chatter detection for micro milling considering environment noises without the requirement of dominant frequency

Existing chatter detection methods were mainly developed for conventional milling processes, and did not consider the influences of environment noises. Thus, they are not suitable for micro milling, in which the widely used small cutting parameters easily lead to the occurrence of non -negligible noises. This article proposes a new variable forgetting factor recursive least-squares (VFF-RLS) algorithm to filter out the chatter-independent component, which is composed of environment noises and periodic components, for the signals sampled from the micro milling process. It is theoretically found that with the aid of VFF-RLS algorithm, there is almost nothing in the filtered signal for stable cuts, while chatter components will be dominant in the filtered signal for unstable cuts. This important finding confirms that some features can be easily extracted from the filtered signal to directly reflect the stable or unstable machining states without the requirement to measure the system's dominant frequency, which is necessary for some existing methods to obtain the frequency band where chatter vibrations appear. Subsequently, a streaming feature selection considering feature interaction (SFS-FI) method is established to select optimal features and remove irrelevant and redundant features. Then, a chatter detection model is developed based on the selected features. Finally, a series of micro milling tests with various axial depths of cut and spindle speeds prove that the proposed model can accurately identify the cutting state, even for slight chatter and stable cuts with small little depths of cut, which are more easily disturbed by environment noises. Results confirm that the detection accuracy is larger than 99 %, and this fact means that the proposed method is effective and practical for detecting chatter occurring in micro milling processes.