Vibration reduction of semisubmersible floating wind turbine using optimized tuned mass and tuned inerter dampers

Over the past decade, offshore wind has positioned itself as one of the most promising renewable energy markets. While this field is currently dominated by fixed-bottom wind turbines located within a limited depth range, floating turbines are showing promise as a way to capture the more developed wind profiles available in deeper waters. Currently, the main challenge with floating offshore wind is that the systems experience larger ultimate loads compared to fixed bottom turbines. These larger loads are caused by the increased motion inherent with floating structures. This study looks to analyze the effects that traditional and inerter based structural control methods can have on reducing the motion of floating offshore wind turbines. Models are developed adding tuned mass dampers (TMD) and tuned inerter dampers (TID) into the three main columns of the semisubmersible platform. Results showed that for free decay tests, heave and pitch RMS values were reduced significantly by the addition of passive structural control. The inerter based structural control consistently outperformed traditional TMD and allowed for similar performance with significantly reduced physical mass values. Copyright (c) 2023 The Authors. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0/)