Examination of surface milling performance of micro-textured ball milling cutter

被引：3

作者：

Yang, Shucai ^{[1
]}

Xiao, Zhanjun ^{[2
]}

Han, Pei ^{[2
]}

Wang, Dawei ^{[2
]}

机构：

[1] Harbin Univ Sci & Technol, Key Lab Adv Mfg & Intelligent Technol, Minist Educ, Harbin, Peoples R China

[2] Harbin Univ Sci & Technol, Sch Mech & Power Engn, Harbin, Peoples R China

来源：

FERROELECTRICS | 2023年 / 610卷 / 01期

基金：

中国国家自然科学基金;

关键词：

Micro-texture; ball milling cutter; titanium alloy; surface machining; cutting;

D O I：

10.1080/00150193.2023.2198960

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To cope with the constant change of tool-work contact area caused by the constant change of workpiece surface curvature during machining surface, the tool-work contact area is evaluated, and the mathematical model of micro-texture distribution is constructed. The milling simulation is carried out by ABAQUS software. The obtained results show that the tool inclination angle is the main factor affecting the milling force, and the micro-texture diameter is the leading factor influencing the milling temperature. Subsequently, the milling experiment is carried out, and a reasonably good agreement between the observed data and the simulation results is reported. The artificial fish swarm algorithm is also exploited to optimize the parameters.

引用

页码：147 / 170

页数：24

共 20 条

[1]

Binbin L., 2020, MOD MANUF ENG, V481, DOI [10.16731/j.cnki.1671-3133.2020.10.016, DOI 10.16731/J.CNKI.1671-3133.2020.10.016]

[2] An experimental study into the effect of micro-textures on the performance of cutting tool [J].

Durairaj, Shanmugasundaram ;

Guo, Jiang ;

Aramcharoen, Ampara ;

Castagne, Sylvie .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (1-4) :1011-1030

[3] Tribological characteristics of a cemented carbide friction surface with chevron pattern micro-texture based on different texture density [J].

Li Dan ;

Yang Xuefeng ;

Lu Chongyang ;

Cheng Jian ;

Wang Shouren ;

Wang Yanjun .

TRIBOLOGY INTERNATIONAL, 2020, 142

[4]

[梁志强 Liang Zhiqiang], 2020, [表面技术, Surface Technology], V49, P143

[5]

Mei Mei, 2020, IOP Conference Series: Materials Science and Engineering, V892, DOI 10.1088/1757-899X/892/1/012114

[6]

Mengqin S., 2006, TOOL TECHNOL, P7, DOI [10.16567/j.cnki.1000-7008.2006.09.002, DOI 10.16567/J.CNKI.1000-7008.2006.09.002]

[7] Study on Surface Roughness of Gcr15 Machined by Micro-Texture PCBN Tools [J].

Pan, Chen ;

Li, Qinghua ;

Hu, Kaixing ;

Jiao, Yuxin ;

Song, Yumei .

MACHINES, 2018, 6 (03)

[8] Effect of Micro-Textured Tool Parameters on Forces, Stresses, Wear Rate, and Variable Friction in Titanium Alloy Machining [J].

Patel, Kaushalandra ;

Liu, Guoliang ;

Shah, Suril R. ;

Ozel, Tugrul .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (02)

[9]

Ren X, 2020, APPL SURF SCI

[10]

Suqin Jiang, 2019, IOP Conference Series: Materials Science and Engineering, V490, DOI 10.1088/1757-899X/490/5/052035

← 1 2 →