Effects of supersonic fine particle bombardment on the microstructure and corrosion properties of Ti-6Al-3Nb-2Zr-1Mo alloy

被引：20
作者：
Chen, Xuepeng [1 ]
Zhang, Lingfeng [1 ,2 ]
Xiong, Yi [1 ,2 ]
Yao, Huai [1 ,2 ]
Ren, Fengzhang [1 ,2 ]
Zhang, Jing [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471023, Peoples R China
[2] Prov & Minist Coconstruct Collaborat Innovat Ctr N, Luoyang 471023, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2023年 / 459卷
基金：
中国国家自然科学基金;
关键词：
Supersonic fine particle bombardment; Ti-6Al-3Nb-2Zr-1Mo alloy; Surface nanocrystallization; Corrosion; PURE TITANIUM; SURFACE NANOCRYSTALLIZATION; IMPEDANCE SPECTROSCOPY; TI-6AL-4V ALLOY; BEHAVIOR; RESISTANCE; LAYER; ROUGHNESS; METALS;
D O I：
10.1016/j.surfcoat.2023.129383
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The surface of Ti-6Al-3Nb-2Zr-1Mo (Ti80) alloy was treated with supersonic fine particle bombardment (SFPB) for different time durations from 30 s to 90 s. The effects of different SFPB time on the microstructure and corrosion properties of the specimens were systematically investigated. The surface grains of the specimens with different SFPB treatment time were all refined and formed surface nanostructures, and the surface microhardness increased by 23.9 %, 31.8 % and 39.6 %, respectively, compared with the untreated specimens. After SFPB, compressive residual stress (CRS) was generated in the specimens, with maximum CRS of Ti80 alloy specimens at different SFPB time were-423 MPa,-451 MPa and-487 MPa, respectively. The results of electrochemical and immersion experiments showed that the corrosion rate of SFPB-treated specimens was reduced, and the passivation effect was best at 60 s of SFPB treatment and decreased with the increase of SFPB treatment time. The SFPB treatment improved the corrosion resistance of the specimens, which was the result of the combined effect of grain refinement and surface CRS.
引用
收藏
页数：12
相关论文
共 49 条
[1]  
[Anonymous], 2004, ASTM STANDARDS
[2]  
Balakrishnan A., 2008, TRENDS BIOMATERIALS, V22, P58
[3]   Corrosion resistance of ultra fine-grained Ti [J].
Balyanov, A ;
Kutnyakova, J ;
Amirkhanova, NA ;
Stolyarov, VV ;
Valiev, RZ ;
Liao, XZ ;
Zhao, YH ;
Jiang, YB ;
Xu, HF ;
Lowe, TC ;
Zhu, YT .
SCRIPTA MATERIALIA, 2004, 51 (03) :225-229
[4]   Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C [J].
Chi, Guangfang ;
Yi, Danqing ;
Liu, Huiqun .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (02) :1162-1174
[5]   Corrosion characterization of titanium alloys by electrochemical techniques [J].
de Assis, SL ;
Wolynec, S ;
Costa, I .
ELECTROCHIMICA ACTA, 2006, 51 (8-9) :1815-1819
[6]   Impedance spectroscopy as a technique for studying the spontaneous passivation of metals in electrolytes [J].
Gaberscek, M ;
Pejovnik, S .
ELECTROCHIMICA ACTA, 1996, 41 (7-8) :1137-1142
[7]   Influence of surface integrity on fatigue strength of 40CrNi2Si2MoVA steel [J].
Gao, Yu-kui ;
Li, Xiang-bin ;
Yang, Qing-xiang ;
Yao, Mei .
MATERIALS LETTERS, 2007, 61 (02) :466-469
[8]   Creep Behavior of Commercially Pure Titanium TA2 After Supersonic Fine Particles Bombardment [J].
Ge, Liling ;
Yuan, Zhanwei ;
Han, Zhenhua .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (02) :1141-1150
[9]   Inhibition effect of inorganic and organic inhibitors on the corrosion of Mg-10Gd-3Y-0.5Zr alloy in an ethylene glycol solution at ambient and elevated temperatures [J].
Huang, Daobing ;
Hu, Junying ;
Song, Guang-Ling ;
Guo, Xingpeng .
ELECTROCHIMICA ACTA, 2011, 56 (27) :10166-10178
[10]   Nanocrystalline Surface Layer on AISI 52100 Steel Induced by Supersonic Fine Particles Bombarding [J].
Kong, Lingyan ;
Lao, Yuanxia ;
Xiong, Tianying ;
Li, Tiefan .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (06) :1007-1013
12345