A STUDY ON THE INFLUENCE OF REINFORCEMENT VOLUME ON AA5083/(SiC-Gr) HYBRID SURFACE COMPOSITE DEVELOPED BY FRICTION STIR PROCESSING

被引：3
作者：
Bharti, Shalok [1 ,2 ]
Ghetiya, Nilesh D. [1 ]
Patel, Kaushik M. [1 ]
Saxena, Kuldeep K. [3 ]
机构：
[1] Nirma Univ, Inst Technol, Dept Mech, Engn, Ahmadabad 382481, Gujarat, India
[2] CT Univ, Dept Mech Engn, Ludhiana 142024, Punjab, India
[3] Lovely Profess Univ, Div Res & Dev, Jalandhar 144001, Punjab, India
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2023年 / 68卷 / 02期
关键词：
Surface Composites; Multi-pass; Friction Stir Processing; Reinforcement; Hybrid Composite; MICROSTRUCTURE;
D O I：
10.24425/amm.2023.142443
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, a hybrid surface composite of AA5083/SiC-Gr was produced by Friction Stir Processing (FSP). Reinforcement material each in 50:50 proportion was filled in the base matrix using holes method. Three different hybrid reinforcement volumes of 301.6 mm3, 452.4 mm3, and 603.2 mm3 were prepared for surface composite. Optical and Scanning Electron Microscopy was used to check the quality of the prepared surface composite and homogeneous distribution of reinforcement was observed in the images. It was observed that due to better uniform distribution of reinforcement particles during 3 pass FSP, specimens with 301.6 mm3 reinforcement volume showed enhanced microhardness and wear properties in comparison with the other specimens.
引用
收藏
页码：625 / 629
页数：5
相关论文
共 20 条
[1]   Production of AA1050/silica fume composite by bobbin tool-friction stir processing: Microstructure, composition and mechanical properties [J].
Ahmed, Mohamed M. Z. ;
Seleman, Mohamed M. El-Sayed ;
Eid, Rana G. ;
Zawrah, M. F. .
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 38 :801-812
[2]   Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing [J].
Amra, M. ;
Bar, Khalil Ranj ;
Hosseini, S. A. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (05) :866-878
[3]   Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel [J].
Bandhu, Din ;
Vora, Jay J. ;
Das, Subhash ;
Thakur, Ashish ;
Kumari, Soni ;
Abhishek, Kumar ;
Sastry, M. Nagaphani .
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (15) :1727-1745
[4]   Fabrication of AA6061/Al2O3 surface composite by double pass friction stir processing and investigation on mechanical and wear properties [J].
Bharti, Shalok ;
Ghetiya, Nilesh ;
Patel, Kaushik .
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 :1785-1799
[5]   Micro-hardness and wear behavior of AA2014/Al2O3 surface composite produced by friction stir processing [J].
Bharti, Shalok ;
Ghetiya, Nilesh D. ;
Patel, Kaushik M. .
SN APPLIED SCIENCES, 2020, 2 (11)
[6]   Investigating the effect of tool speed on the mechanical properties of Al5052 processed by friction stir processing [J].
Bharti, Shalok ;
Dutta, Varun ;
Sharma, Sanjay ;
Ghetiya, Nilesh D. .
MATERIALS TODAY-PROCEEDINGS, 2020, 33 :1605-1609
[7]   A review on manufacturing the surface composites by friction stir processing [J].
Bharti, Shalok ;
Ghetiya, Nilesh D. ;
Patel, Kaushik M. .
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (02) :135-170
[8]   Microstructure, Mechanical and Sliding Wear Behavior of AA5083-B4C/SiC/TiC Surface Composites Fabricated Using Friction Stir Processing [J].
Jain, Vikram Kumar S. ;
Muhammed, P. M. ;
Muthukumaran, S. ;
Babu, S. P. Kumaresh .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (06) :1519-1529
[9]   Multi-Attribute Group Decision Making (MAGDM) Using Fuzzy Linguistic Modeling Integrated With the VIKOR Method for Car Purchasing Model [J].
Kumari, Soni ;
Nakum, Bhavdeep ;
Bandhu, Din ;
Abhishek, Kumar .
INTERNATIONAL JOURNAL OF DECISION SUPPORT SYSTEM TECHNOLOGY, 2022, 14 (01)
[10]   High strain rate superplasticity via friction stir processing (FSP): A review [J].
Mirzadeh, Hamed .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 819
12