Surface Heat Flux Measurements Based on the Non-Integer System Identification Method Using Surface Temperature Data

被引：1

作者：

Duernhofer, Christian ^{[1
,2
]}

Hufgard, Fabian ^{[1
]}

Loehle, Stefan ^{[1
]}

Fasoulas, Stefanos ^{[1
]}

机构：

[1] Univ Stuttgart, Inst Space Syst, High Enthalpy Flow Diagnost Grp, Stuttgart, Germany

[2] Univ ofStuttgart, Inst Space Syst, High Enthalpy Flow Diagnost Grp, D-70569 Stuttgart, Germany

来源：

HEAT TRANSFER ENGINEERING | 2024年 / 45卷 / 12-13期

关键词：

THERMOGRAPHY;

D O I：

10.1080/01457632.2023.2241177

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper presents an experimental approach to inversely determine surface heat flux from surface temperature data for an arbitrary body. The relation between heat flux and temperature is calibrated using the non-integer system identification method. The surface temperature is measured using an infrared camera. The approach is applied using a well-established plasma wind tunnel condition so that the results are comparable to a reference measurement with a water calorimeter. The maximum deviation between the reference and the novel heat flux measurement was 6.3% and 14.3% for two separately generated impulse responses, respectively. In conclusion, this new method allows in future applications an additional heat flux determination based on surface temperature data. Since surface temperature data is a standard measurement, only an additional calibration step is needed to standardize this heat flux measurement method.

引用

页码：1098 / 1105

页数：8

共 18 条

[11]

Hufgard F., 2019, 2019 AIAA SCITECH FO, DOI [10.2514/6.2019-2062, DOI 10.2514/6.2019-2062]

[12]

Loehle S., 2016, 32 AIAA AER MEAS TEC, DOI [10.2514/6.2016-3201, DOI 10.2514/6.2016-3201]

[13]

Loehle S Jr., 2016, 32 AIAA AER MEAS TEC, pp 3205, DOI [10.2514/6.2016-3205, DOI 10.2514/6.2016-3205]

[14] Assessment of high enthalpy flow conditions for re-entry aerothermodynamics in the plasma wind tunnel facilities at IRS [J].