Multimodal fluorescence lifetime imaging and optical coherence tomography for longitudinal monitoring of tissue-engineered cartilage maturation in a preclinical implantation model

Significance: Cartilage tissue engineering is a promising strategy for effective curative therapies for treatment of osteoarthritis. However, tissue engineers depend predominantly on time-consuming, expensive, and destructive techniques as quality control to monitor the maturation of engineered cartilage. This practice can be impractical for large-scale biomanufacturing and prevents spatial and temporal monitoring of tissue growth, which is critical for the fabrication of clinically relevant-sized cartilage constructs. Nondestructive multimodal imaging techniques combining fluorescence lifetime imaging (FLIm) and optical coherence tomography (OCT) hold great potential to address this challenge.Aim: The feasibility of using multimodal FLIm-OCT for nondestructive, spatial, and temporal monitoring of self-assembled cartilage tissue maturation in a preclinical mouse model is investigated.Approach: Self-assembled cartilage constructs were developed for 4 weeks in vitro followed by 4 weeks of in vivo maturation in nude mice. Sterile and nondestructive in situ multispectral FLIm and OCT imaging were carried out at multiple time points (t = 2, 4, and 8 weeks) during tissue development. FLIm and 3D volumetric OCT images were reconstructed and used for the analysis of tissue biochemical homogeneity, morphology, and structural integrity. A biochemical homogeneity index was computed to characterize nonhomogeneous tissue growth at different time points. OCT images were validated against histology.Results: FLIm detects heterogenous extracellular matrix (ECM) growth of tissue-engineered cartilage. The outer edge of the tissue construct exhibited longer fluorescence lifetime in 375 to 410 and 450 to 485 nm spectral channels, indicating increase in collagen content. Significant (p < 0.05) decrease of construct homogeneity index was observed between t = 2 weeks and t = 4 weeks. Both FLIm and OCT images revealed defects (voids) at the center of the tissue construct during in vitro culture (t = 2 and 4 weeks). Cyst formation during in vivo culture was detected by OCT and confirmed with histology.Conclusions: The ability of multimodal FLIm-OCT to nondestructively monitor the heterogenous growth of engineered tissue constructs in situ is demonstrated. Spatial and temporal variation of construct ECM component was detected by FLIm. OCT reveals structural defects (voids and cysts). This multimodal approach has great potential to replace costly destructive tests in the manufacturing of tissue-engineered medical products, facilitating their clinical translation.