Simulation and regulation of fractures asynchronous initiation-propagation for deep shale gas horizontal well fracturing

The intensive cluster fracturing technology is widely applied in deep shale reservoirs. However, field data show that the fracture initiation time and propagation length of each cluster are different, which causes significant non-uniformity and affects the fracturing results. In this paper, a hydraulic fracture asynchronous initiation and propagation model for deep shale gas is established based on mechanics theory, which can consider the influence of in-situ stress variation and stress interference effect on the fracture asynchronous initiation and propagation behavior. According to the model design parameters, deep shale hydraulic fractures are regulated and optimized in combination with the non-uniform flow-limiting perforation technology to achieve uniform fracture propagation. The results show that, the non-uniformity of each fracture is obvious using conventional uniform perforation. However, with non-uniform perforation, each cluster perforation number is adjusted, the difference of initiation time and each fracture propagation velocity is significantly reduced, and the length of all fractures tend to be basically the same. And the field monitoring data are in good agreement with the calculation results, which verifies the reliability of the model. This study can reduce design blindness of non-uniform flow-limiting perforation technique, and has an important theoretical guidance for the optimal design of fracturing.