Decoration of Ag nanoparticles on CoMoO4 rods for efficient electrochemical reduction of CO2

Hydrothermal and photoreduction/deposition methods were used to fabricate Ag nanoparticles (NPs) decorated CoMoO4 rods. Improvement of charge transfer and transportation of ions by making heterostructure was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements. Linear sweep voltammetry results revealed a fivefold enhancement of current density by fabricating heterostructure. The lowest Tafel slope (112 mV/dec) for heterostructure compared with CoMoO4 (273 mV/dec) suggested the improvement of electrocatalytic performance. The electrochemical CO2 reduction reaction was performed on an H-type cell. The CoMoO4 electrocatalyst possessed the Faraday efficiencies (FEs) of CO and CH4 up to 56.80% and 19.80%, respectively at - 1.3 V versus RHE. In addition, Ag NPs decorated CoMoO4 electrocatalyst showed FEs for CO, CH4, and C2H6 were 35.30%, 11.40%, and 44.20%, respectively, at the same potential. It is found that CO2 reduction products shifted from CO/CH4 to C2H6 when the Ag NPs deposited on the CoMoO4 electrocatalyst. In addition, it demonstrated excellent electrocatalytic stability after a prolonged 25 h amperometric test at - 1.3 V versus RHE. It can be attributed to a synergistic effect between the Ag NPs and CoMoO4 rods. This study highlights the cooperation between Ag NPs on CoMoO4 components and provides new insight into the design of heterostructure as an efficient, stable catalyst towards electrocatalytic reduction of CO2 to CO, CH4, and C2H6 products.