Modified regression model for bond-slip constitutive relationship between high-strength steel rebars and UHP-FRC based on experimental tests

被引:6
作者
Yang, Bo [1 ]
Mao, Kuanhong [1 ]
Liu, Jia-Hua [1 ]
Chen, Kang [2 ]
Elchalakani, Mohamed [3 ]
机构
[1] Chongqing Univ, Sch Civil Engn, Shabei St 83,Campus B, Chongqing, Peoples R China
[2] Xian Jiaotong Liverpool Univ, Dept Civil Engn, 111 Renai Rd, Suzhou 215123, Jiangsu, Peoples R China
[3] Univ Western Australia M051, Fac Engn & Math Sci, 35 Stirling Highway, Perth, 6009, Australia
基金
中国国家自然科学基金;
关键词
UHP-FRC; High-strength reinforcing bars; Bond -slip model; Bond stress position function; HIGH-PERFORMANCE CONCRETE; REINFORCING BARS; BEHAVIOR;
D O I
10.1016/j.cscm.2024.e02931
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Ultra-High-Performance Fiber Reinforced Concrete (UHP-FRC) has been widely applied due to its advantages over normal concrete. The bond strength between UHP-FRC and steel reinforcement, especially high-strength steel reinforcing bar, is the premise for an in-depth analysis of UHP-FRC's behavior at the component level. A series of 24 pull-out tests were designed considering key variables including embedment length (3d, 4d, 5d and 6d), the steel grades (HRB500 and HRB600) and diameter of rebars (16 mm, 18 mm and 20 mm) based on a mature UHP-FRC mix design. It was found that the bond properties of UHP-FRC with high-strength steel bars were much different from ordinary concrete. The constitutive relationship originally used to describe the bond-slip of ordinary concrete was no longer applicable. Based on the test data, a modified constitutive model was proposed based on the regression method and the fib Model Code 2010. Due to the excessively high bond strength, the effect of strain penetration that was originally presented only in bars with long embedment lengths was also considered in the new bond-slip relationship. The bond stress distribution of different locations was obtained by innerembedded strain gage and the position function which reflected the change of bond stress was deduced. Combined with the product of the average bond-stress-slip constitutive equation and the position function of UHP-FRC, a more accurate description of the bond-slip constitutive relation was presented. Good agreement with test data was achieved for both the proposed model and position function.
引用
收藏
页数:16
相关论文
共 41 条
[1]  
A.S.W. Group, 2013, Ultra High Performance Fiber-Reinforced Concrete: Recommendations
[2]   Bond strength of post-installed high strength deformed rebar in concrete [J].
Ahmed, Khondaker Sakil ;
Shahjalal, Md. ;
Siddique, Tanvir Ahmed ;
Keng, Ang Kok .
CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 15
[3]   Factors affecting bond development between Ultra High Performance Concrete (UHPC) and steel bar reinforcement [J].
Alkaysi, Mo ;
El-Tawil, Sherif .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 144 :412-422
[4]  
[安明喆 AN Mingzhe], 2007, [中国铁道科学, China Railway Science], V28, P50
[5]  
[Anonymous], 1993, Model Code for Concrete Structures 1990
[6]  
[Anonymous], 2013, Model Code for Concrete Structures 2010
[7]   Predicting the bond between concrete and reinforcing steel at elevated temperatures [J].
Aslani, Farhad ;
Samali, Bijan .
STRUCTURAL ENGINEERING AND MECHANICS, 2013, 48 (05) :643-660
[8]   Adherence prediction between ribbed steel rebars and concrete: A new perspective and comparison with codes [J].
Biscaia, Hugo C. ;
Soares, Sergio .
STRUCTURES, 2020, 25 :979-999
[9]   Artificial neural network model for steel-concrete bond prediction [J].
Dahou, Zohra ;
Sbartai, Z. Mehdi ;
Castel, Arnaud ;
Ghomari, Fouad .
ENGINEERING STRUCTURES, 2009, 31 (08) :1724-1733
[10]   OPTIMIZATION OF ULTRA-HIGH-PERFORMANCE CONCRETE BY THE USE OF A PACKING MODEL [J].
DE LARRARD, F ;
SEDRAN, T .
CEMENT AND CONCRETE RESEARCH, 1994, 24 (06) :997-1009