The effect of thermal aging on flexural strength of CAD/CAM hybrid and polymeric materials

The field of dentistry is consistently innovating with the introduction of novel hybrid and polymer materials for computer-aided design and manufacturing (CAD/CAM). It is noteworthy that the temperature within the oral cavity has a significant impact on the strength of new biomaterials utilized for CAD/CAMfabrication of fixed partial dentures (FPDs). Studies have demonstrated that alterations in intraoral temperature may significantly affect the longevity and durability of dental restorative materials. This study aimed to evaluate the flexural strength, flexural modulus, and effect of thermal aging onCAD/CAMrestorative materials. FiveCAD/CAMmaterials were investigated: nano-ceramic-hybrid (GR), polymer-infiltrated-ceramic-network (VE), polyether-ether-ketone (PK), fiberglass-reinforced epoxy-resin (CT), and Feldspar Ceramic (VB). A total of 100 bar-shaped specimens were prepared (N= 20). Each group was subdivided into thermocycling (TC) and no-thermocycling (NTC) subgroups (n= 10). All the specimens underwent a 3-point bending test. The mean flexural strengths and moduli were statistically analyzed using paired t-test, analysis of variance (ANOVA), and Bonferroni pair-wise comparison (p< 0.05). Significant differences were observed in the flexural strength (FS) and modulus (E) between the materials (p< 0.001). GR had the highest FS among tested hybrid materials. NTCCT had the highest FS (924.88 +/- 120.1 MPa), followed byGR (385.13 +/- 90.73 MPa), then PK (309.56 +/- 46.84 MPa). The FS of brittle ceramic VB was the lowest (p< 0.001), but similar to that of PICN VE. Only resin-containing VE and CT significantly decreased in E after thermocycling (p< 0.01, p= 0.013), showing the softening effect of thermocycling on their resin matrix. It can be concluded that new hybrid materials (GR) had higher flexural strength than feldspar ceramic and other resin/polymericCAD/CAM materials. Polymeric PEEK and GR hybrid materials were resistant to significant deleterious effects of TC. Therefore, they would be appropriate for situations with a higher stress load.