Removal of Bromine from Polymer Blends with a Composition Simulating That Found in Waste Electric and Electronic Equipment through a Facile and Environmentally Friendly Method

The increasing volume of plastics from waste electric and electronic equipment (WEEE) nowadays is of major concern since the various toxic compounds that are formed during their handling enhance the difficulties in recycling them. To overcome these problems, this work examines solvent extraction as a pretreatment method, prior to thermochemical recycling by pyrolysis. The aim is to remove bromine from some polymeric blends, with a composition that simulates WEEE, in the presence of tetrabromobisphenol A (TBBPA). Various solvents-isopropanol, ethanol and butanol-as well as several extraction times, were investigated in order to find the optimal choice. Before and after the pretreatment, blends were analysed by X-ray fluorescence (XRF) to estimate the total bromine content. Blends were pyrolyzed before and after the soxhlet extraction in order to evaluate the derived products. FTIR measurements of the polymeric blends before and after the soxhlet extraction showed that their structure was maintained. From the results obtained, it was indicated that the reduction of bromine was achieved in all cases tested and it was similar to 34% for blend I and similar to 46% and 42% for blend II when applying a 6 h soxhlet with isopropanol and ethanol, respectively. When using butanol bromine was completely eliminated, since the reduction reached almost 100%. The latter finding is of great importance, since the complete removal of bromine enables the recycling of pure plastics. Therefore, the main contribution of this work to the advancement of knowledge lies in the use of a solvent (i.e., butanol) which is environmentally friendly and with a high dissolving capacity in brominated compounds, which can be used in a pretreatment stage of plastic wastes before it is recycled by pyrolysis.