Tensile behavior of the bolt-jointed GFRP after low-velocity impact

被引:20
作者
Wan, Yun [1 ,2 ]
Lu, Wenbin [1 ,2 ]
Li, Hao [1 ,2 ]
Huang, Yonghu [1 ,2 ]
Lei, Zuxiang [1 ,2 ]
Yang, Bin [3 ]
机构
[1] East China Jiaotong Univ, Jiangxi Key Lab Disaster Prevent Mitigat & Emergen, Nanchang, Peoples R China
[2] East China Jiaotong Univ, Sch Civil Engn & Architecture, Nanchang, Peoples R China
[3] Tongji Univ, Sch Aerosp Engn & Appl Mech, Shanghai, Peoples R China
基金
中国国家自然科学基金;
关键词
failure mechanism; GFRP bolt joint; low-velocity impact; mechanical behavior; tension after impact; COMPRESSIVE STRENGTH; DELAMINATION; DAMAGE;
D O I
10.1002/pc.27267
中图分类号
TB33 [复合材料];
学科分类号
摘要
Bolt joint is one of the most commonly used methods for fiber-reinforced polymers (FRP) structures whose mechanical properties are quite sensitive to both the stacking sequence and the low-velocity impact loading. For this reason, herein, we conducted an experimental method with the self-designed clamp to evaluate the influence of low-velocity impact (LVI) at the compressed area nearby the bolt hole on the residual tensile properties of bolt joint GFRP laminates with various stacking sequences. After comparing the displacement-force curves and failure modes of different bolt joints in tensile tests after LVI loading, the effect of LVI and the failure mechanism subjected to post-impact loading are discussed in depth. Tensile properties show that the damage caused by impact has a significant effect on the performance of the composite. Under the condition of incident energy of 9 J and distance of 6 mm from the center of the bolt hole to the impact point, the ultimate tensile value of Ply-A, Ply-B, and Ply-C samples are reduced by 32.3%, 34.6%, and 50%, respectively. This influence can also be confirmed by observing the failure morphology, describing the interlaminar behavior of the specimens varying stacking sequence, where a more serious interlaminar damage was identified at Ply-C specimens. In addition, we also utilized the VIC-2D device to record and analyze the strain of different ply stacking sequence specimens in the failure process. The result shows that all types of cases have the same initial failure mode of bearing, but various final failure modes.
引用
收藏
页码:2645 / 2655
页数:11
相关论文
共 50 条
[41]   The Influence of the Boundary Conditions on Low-Velocity Impact Composite Damage [J].
Amaro, A. M. ;
Reis, P. N. B. ;
Magalhaes, A. G. ;
de Moura, M. F. S. F. .
STRAIN, 2011, 47 :E220-E226
[42]   Compression and low-velocity impact behavior of aluminum syntactic foam [J].
Castro, G. ;
Nutt, S. R. ;
Wenchen, X. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 :222-229
[43]   Behavior of Reinforced Concrete Slabs under Low-Velocity Impact [J].
Xiao, Yao ;
Li, Bing ;
Fujikake, Kazunori .
ACI STRUCTURAL JOURNAL, 2017, 114 (03) :643-658
[44]   Low-velocity impact behavior of elliptic curved composite structures [J].
Gebhardt, J. ;
Schlamp, M. ;
Ehrlich, I. ;
Hiermaier, S. .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2023, 180
[45]   Damage Characterization of GFRP Hollow Ribbed Emergency Pipes Subjected to Low-Velocity Impact by Experimental and Numerical Analysis [J].
Cheng, Ming ;
Ding, Dongdong ;
Ma, Yaojun ;
Zhu, Sirong .
POLYMERS, 2024, 16 (22)
[46]   Low-Velocity Impact Resistance of Al/Gf/PP Laminates with Different Interface Performance [J].
Lin, Yanyan ;
Li, Huaguan ;
Zhang, Zhongwei ;
Tao, Jie .
POLYMERS, 2021, 13 (24)
[47]   Failure analysis of angle-ply thin woven GFRP composites under low-velocity impact and low-temperature [J].
Khashaba, U. A. .
POLYMER COMPOSITES, 2025,
[48]   Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts [J].
Li, Zongjun ;
Khennane, Amar ;
Hazell, Paul J. ;
Remennikov, Alex M. .
COMPOSITE STRUCTURES, 2018, 206 :425-438
[49]   Low-velocity impact to transmission line conductors [J].
Waters, Daniel H. ;
Hoffman, Joseph ;
Hakansson, Eva ;
Kumosa, Maciej .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 106 :64-72
[50]   Low-velocity impact strength of sandwich materials [J].
Crupi, V. ;
Epasto, G. ;
Guglielmino, E. .
JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2011, 13 (04) :409-426