EFFECT OF ULTRAFAST HEATING ON AISI 304 AUSTENITIC STAINLESS STEEL

被引：3
作者：
Vargas, Bryan Ramiro Rodriguez [1 ]
Albini, Luciano [2 ]
Tiracorrendo, Giulia [2 ]
Massi, Riccardo [1 ]
Stornelli, Giulia [1 ,3 ]
Di Schino, Andrea [1 ]
机构：
[1] Univ Perugia, Dipartimento Ingn, Perugia, Italy
[2] RINA Consulting Ctr Sviluppo Materiali SpA, Via Castel Romano 100, I-00128 Rome, Italy
[3] Univ Perugia, Dipartimento Ingn, Via Goffredo Duranti 93, I-06125 Perugia, Italy
来源：
ACTA METALLURGICA SLOVACA | 2023年 / 29卷 / 02期
关键词：
ultrafast heating; heat treatment; stainless steels; AISI; 304; MICROSTRUCTURE; EVOLUTION; RECRYSTALLIZATION; OPTIMIZATION; STRENGTH;
D O I：
10.36547/ams.29.2.1833
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
This study explores the effects of ultrafast heating on AISI 304 austenitic stainless steel. The research shows that ultrafast heating can lead to fine-grained mixed microstructures in steel, making it a potential alternative for modifying microstructure in stainless steel. The study demonstrates that a minimum temperature of 980 & DEG;C is required to achieve a fully recrystallized microstructure. The results also suggest that a lower temperature can result in a finer recrystallized grain size compared to higher temperature results. The study provides valuable insights into the impact of ultrafast heating on the microstructural constituents, recrystallization temperatures, and mechanical properties of investigated steel.
引用
收藏
页码：104 / 107
页数：4
相关论文
共 32 条
[1]   The Effect of Ultra-Fast Heating on the Microstructure, Grain Size and Texture Evolution of a Commercial Low-C, Medium-Mn DP Steel [J].
Banis, Alexandros ;
Hernandez Duran, Eliseo ;
Bliznuk, Vitaliy ;
Sabirov, Ilchat ;
Petrov, Roumen H. ;
Papaefthymiou, Spyros .
METALS, 2019, 9 (08)
[2]   Coated Metal Powders for Laser Powder Bed Fusion (L-PBF) Processing: A Review [J].
Bidulsky, Robert ;
Gobber, Federico Simone ;
Bidulska, Jana ;
Ceroni, Marta ;
Kvackaj, Tibor ;
Grande, Marco Actis .
METALS, 2021, 11 (11)
[3]   Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions [J].
Bidulsky, Robert ;
Bidulska, Jana ;
Gobber, Federico Simone ;
Kvackaj, Tibor ;
Petrousek, Patrik ;
Actis-Grande, Marco ;
Weiss, Klaus-Peter ;
Manfredi, Diego .
MATERIALS, 2020, 13 (15)
[4]   The Effect of Ultrafast Heating in Cold-Rolled Low Carbon Steel: Recrystallization and Texture Evolution [J].
Cerda, Felipe M. Castro ;
Kestens, Leo A. I. ;
Monsalve, Alberto ;
Petrov, Roumen H. .
METALS, 2016, 6 (11)
[5]   Induction Hardening 5150 Steel: Effects of Initial Microstructure and Heating Rate [J].
Clarke, K. D. ;
Van Tyne, C. J. ;
Vigil, C. J. ;
Hackenberg, R. E. .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (02) :161-168
[6]   The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical properties [J].
De Knijf, Dorien ;
Puype, Athina ;
Fojer, Cecilia ;
Petrov, Roumen .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 627 :182-190
[7]   Heat Treatment Effect on Microstructure Evolution in a 7% Cr Steel for Forging [J].
Di Schino, Andrea ;
Gaggiotti, Matteo ;
Testani, Claudio .
METALS, 2020, 10 (06) :1-13
[8]   Corrosion Behavior and Mechanical Properties of AISI 316 Stainless Steel Clad Q235 Plate [J].
Di Schino, Andrea ;
Testani, Claudio .
METALS, 2020, 10 (04)
[9]   Effect of Initial Microstructure, Heating Rate, and Austenitizing Temperature on the Subsequent Formation of Martensite and Its Microstructural Features in a QT Steel [J].
Eggbauer, Annika ;
Lukas, Marina ;
Prevedel, Petri ;
Panzenboeck, Michael ;
Ressel, Gerald ;
Ebner, Reinhold .
STEEL RESEARCH INTERNATIONAL, 2019, 90 (01)
[10]   Corrosion Resistance of GMAW Duplex Stainless Steels Welds [J].
Fabiola Miranda-Perez, Argelia ;
Ramiro Rodriguez-Vargas, Bryan ;
Calliari, Irene ;
Pezzato, Luca .
MATERIALS, 2023, 16 (05)
1234