Providing a strategy to restore damaged RC beam-column joints with the combination of CFRP and HPFRCC

This paper endeavors to assess the seismic performance of 3D reinforced concrete (RC) beam-column joints situated on the exterior of buildings, but lacking special ductility requirements. The joints have been rehabilitated by High-Performance Fiber-Reinforced Cement Composites (HPFRCC) and retrofitted using Carbon Fiber Reinforced Polymer (CFRP) wrap methodology. In this context, five beam-column joints located on the exterior of a structure have been subjected to cyclic lateral loading, while being scaled down to half their original size. The present study entailed an investigation into the cyclic behavior of three control specimens in its initial stage. Following the initial examination, it was observed that the control specimens, lacking any designated ductility standards, experienced significant core damage. During the subsequent phase of experimentation, the impaired concrete sections of the control samples were remediated through substitution with HPFRCC matter. Additionally, CFRP sheets were implemented for retrofit purposes. The modified specimens were then exposed to comparable cycles of loading. An analysis is conducted on the empirical findings of the specimens under investigation. The findings of this study indicate that the utilization of HPFRCC materials and CFRP sheets in the restoration and enhancement of deteriorated joints has led to a notable enhancement of their strength and displacement capacity. Specifically, this approach has facilitated the creation of a flexural plastic hinge and impeded the occurrence of shear failure within the core, leading to an improved overall behavior of the repaired damaged joint, which is comparable to that of undamaged seismic joints. The application of this technique demonstrates a high degree of efficacy in the rehabilitation and enhancement of edifices with deficient seismic details that have sustained damage subsequent to an earthquake event.