Study on the impact resistance of steel fiber-reinforced self-compacting concrete after high temperature

The present study explored the dynamic mechanical properties of steel fiber-reinforced self-compacting concrete (SFRSCC) after a high temperature. The impact test was conducted using a phi 80 mm split Hopkinson pressure bar (SHPB) device, with a focus on the factors of influence and the regularity of steel fiber content (0.5 %, 1.0 %, and 1.5 %), impact strain rate (55 s- 1, 90 s- 1, and 140 s-1), and temperature (20 degrees C, 300 degrees C, 600 degrees C, and 900 degrees C) on the failure form, dynamic strength, impact toughness, and dynamic increase factor (DIF-sigma) of SFRSCC after hightemperature exposure, and the mechanism analysis based on the results of the SEM examination. The impact test results revealed the following: (1) With the increase in the steel fiber (SF) content, the dynamic strength (fp) of the SFRSCC exhibited a further evident growth trend after high temperature compared to that at normal temperature reaching 105 % and the toughness index also increased by more than 20 %. (2) While the effect of SF content on DIF-sigma of SFRSCC was not significant under normal temperature conditions after high-temperature exposure, the DIF of SFRSCC can increase by over 40 % with the increase of SF content. In addition, the strain rate effect was also further significant, and the DIF-sigma can increased by about 30 % after high-temperature treatment compared to normal temperature. (3) A prediction formula was proposed for DIF-sigma of SFRSCC after high temperature, and the results were in good agreement with the results of the impact test. This prediction formula can better provide theoretical data support for disaster prevention and reduction in subsequent projects. The findings of the present study would serve as a valuable reference for subsequent research on the impact resistance of SFRSCC after high-temperature exposure.