An electromagnetic vibration energy harvester with compact flexure guide for low frequency applications

This paper presents the design, modeling, fabrication, and characterization of a novel electromagnetic vibration energy harvester (EVEH) using a compact flexure guide structure and opposing permanent magnets. The flexure guide is a unique cylindrical structure, and can transfer force and motion by the deformation of elastic beams. It allows the single-degree-of-freedom motion characteristic, and eliminates the friction between the permanent magnets and the housing structure, which exists in mostly reported magnet-spring based vibration energy harvesters. The structure also greatly reduces the spacing between the coil and the permanent magnets, which considerably increases the magnetic flux linkage through the coil. Experimental results show that the EVEH prototype can generate an output voltage of 6.08 V and output power of 4.02 mW from 0.1 g acceleration at resonant (19.5 Hz), achieving a normalized power density of 3.28 mW cm - 3g - 2. In addition, the flexure guide can be directly fabricated by 3D printing, which greatly simplifies the harvester assembly compared to other EVEHs reported. In terms of the proposed EVEH, a self-powered sensor network is implemented to transfer the GPS data to some appointed terminals.