Corrosion mechanism and fatigue behavior of aluminum alloy with high silicon content

被引:8
作者
Shui, Youfu [1 ]
Liu, Jinxiang [1 ]
Huang, Weiqing [1 ]
Zhao, Nuo [2 ]
Ren, Peirong [1 ]
Zhao, Chengzhang [1 ]
机构
[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
[2] China Shipbuilding Informat Ctr, Beijing 100101, Peoples R China
关键词
Al-8Si alloy; Pitting corrosion; Intergranular corrosion; Dislocation energy; Corrosion fatigue; INTERGRANULAR CORROSION; SI ALLOYS; AL; MICROSTRUCTURE; PRECIPITATION; LONG; ROOM;
D O I
10.1016/j.matchemphys.2022.127211
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The corrosion and corrosion-assisted fatigue life degradation behaviors of Al-8Si alloy is investigated. The test results show that galvanic cells are formed in the inter-dendrites due to high Si concentration, leading to pitting corrosion. The Al2Cu phase and the Si-rich phase precipitate at the grain boundaries in the inter-dendrites, among which the Al2Cu phase is the most critical factor leading to intergranular corrosion. Subsequently, intergranular corrosion gradually develops into intragranular corrosion attributed to the higher dislocation energy in fine-grained Al grains. Additionally, it is found by comparing the corrosion potential and corrosion rate that high Si concentration would cause the decrease in corrosion resistance. Finally, the fatigue test results show that the corrosion could reduce fatigue life of Al-8Si alloy by 79.77% on average. Therefore, the corrosion -induced fatigue life degradation is very worth to be considered in structures.
引用
收藏
页数:10
相关论文
共 50 条
[21]   Corrosion Behavior of 6101 Aluminum Alloy Strands for Automotive Wires [J].
Laurino, Adrien ;
Andrieu, Eric ;
Harouard, Jean-Paul ;
Lacaze, Jacques ;
Lafont, Marie-Christine ;
Odemer, Gregory ;
Blanc, Christine .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2013, 160 (11) :C569-C575
[22]   The corrosion behavior of chromated AA2024 aluminum alloy in 3.5% NaCl solution [J].
Zhou, Yong ;
Zhang, Pei ;
Xiong, Jinping ;
Yan, Fuan .
ANTI-CORROSION METHODS AND MATERIALS, 2019, 66 (06) :879-887
[23]   Stress corrosion behavior of 6082 aluminum alloy [J].
Zhou, Bin ;
Yang, Li ;
Yang, Shou-Bing ;
Bai, Di ;
Olugbade, Oluwatobi ;
Huang, Gen-Zhe .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2020, 71 (07) :1194-1205
[24]   Corrosion behavior and mechanism of FeCrNi medium entropy alloy prepared by powder metallurgy [J].
Zhou, Zhengyan ;
Liu, Bin ;
Guo, Wenmin ;
Fu, Ao ;
Duan, Heng ;
Li, Weihua .
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 867
[25]   Long-term corrosion behavior of the 7A85 aluminum alloy in an industrial-marine atmospheric environment [J].
Zhao, Qiyue ;
Guo, Chuang ;
Niu, Keke ;
Zhao, Jinbin ;
Huang, Yunhua ;
Li, Xiaogang .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 12 :1350-1359
[26]   Exfoliation Corrosion Mechanism of Friction Stir Welded 2219 Aluminum Alloy [J].
Zhang Hua ;
Sun Datong ;
Zhang He ;
Ma Fangfang ;
Huang Jihua .
RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (01) :103-107
[27]   Effects of ultrasonic peening on corrosion fatigue and corrosion behavior of welded AA5086-H32 aluminum alloy [J].
Sadeler, Recep ;
Erge, Hakan ;
Atasoy, Selcuk .
KOVOVE MATERIALY-METALLIC MATERIALS, 2024, 62 (06) :377-387
[28]   Effects of grain structure related precipitation on corrosion behavior and corrosion fatigue property of Al-Mg-Si alloy [J].
Wang, Yu ;
Deng, Yunlai ;
Chen, Jiqiang ;
Dai, Qingsong ;
Guo, Xiaobin .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03) :5391-5402
[29]   Effect of Tempers on Electrochemical Corrosion Behavior of 7150 Aluminum Alloy Plate in Various Corrosive Media [J].
Sun, Qingqing ;
Hu, Jiugang ;
Li, Jie ;
Chen, Kanghua ;
Dong, Pengxuan ;
Liao, Xingzhi ;
Yang, Yang .
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2017, 12 (06) :5363-5377
[30]   Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling [J].
Kanta, P. Laxman Mani ;
Srivastava, V. C. ;
Venkateswarlu, K. ;
Paswan, Sharma ;
Mahato, B. ;
Das, Goutam ;
Sivaprasad, K. ;
Krishna, K. Gopala .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017, 24 (11) :1293-1305