Rotation axis calibration of a 3D scanning system based on dual-turntable angle cancellation

Rotation axis calibration is crucial for high-precision automatic point cloud stitching in turntable-based 3D scan-ning systems. To achieve a 360 degrees sampling with a 2D calibrator in rotation axis calibration, this paper proposes a dual-turntable angle cancellation (DTAC) method. DTAC introduces an auxiliary turntable to keep a proper rela-tive angle between the 3D sensor and the calibrator during the calibration process. The auxiliary turntable rotates at the same and opposite angle as the main turntable and cancels the increment of the relative angle. By projecting the feature points on the planar calibrator from real-world space to virtual calibration space, the projected points all share the same rotation axis of the main turntable. Further, a layered circle center extraction (LCCE) algorithm is applied to deal with outlier data points. The algorithm uses a two-step robust estimation strategy combining RANSAC circle fitting with a median noise filter for circle center selection. The standard ball reconstruction experi-ment shows that the 3D system calibrated by the method achieves a mean absolute error of 0.022 mm and root mean square error of 0.025 mm within the measurement distance of 60-70 cm. Point cloud stitching experiments of dif-ferent types of objects show that our method outperforms other state-of-the-art methods in stitching accuracy. The DTAC method and LCCE algorithm can improve turntable-based 3D scanning systems.(c) 2023 Optica Publishing Group