共 45 条
MoS2 reinforced PEEK composite for improved aqueous boundary lubrication
被引:31
作者:
Hou, Xin
[1
]
Bai, Pengpeng
[1
]
Li, Jingyang
[1
]
Li, Yuanzhe
[1
]
Cao, Hui
[1
]
Wen, Xiangli
[1
]
Meng, Yonggang
[1
]
Ma, Liran
[1
]
Tian, Yu
[1
]
机构:
[1] Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol Adv Equipment, Beijing 100084, Peoples R China
来源:
基金:
中国国家自然科学基金;
关键词:
polyether-etherketone (PEEK) composite;
MoS2;
anti-wear performance;
aqueous lubrication;
boundary lubrication;
POLY(ETHER ETHER KETONE);
TRIBOLOGICAL BEHAVIOR;
MECHANICAL-PROPERTIES;
STAINLESS-STEEL;
DISTILLED WATER;
WEAR PROPERTIES;
SEA-WATER;
FRICTION;
POLYMER;
DRY;
D O I:
10.1007/s40544-022-0673-y
中图分类号:
TH [机械、仪表工业];
学科分类号:
0802 ;
摘要:
Polyether-etherketone (PEEK) is a corrosion-resistant material that has been widely used in aqueous lubrication. However, its anti-wear performance must be improved for its application in the industry. In this study, to improve the anti-wear performance of PEEK for aqueous boundary lubrication, PEEK/MoS2 composites were prepared by ball-milling and spark plasma sintering processes. A competitive MoS2 mechanism between the low shear strength property and the role of promoting wear debris generation influences the anti-wear performance of PEEK/MoS2 composites. Experiments demonstrated that the coefficients of friction (COF) and wear rate of PEEK composite with 0.25 wt% MoS2 were significantly reduced 68% and 94%, respectively. Furthermore, this was the first time that a PEEK composite could achieve a COF of less than 0.05 in aqueous boundary lubrication. Its anti-wear performance was verified to be better than that of PEEK/carbon fiber (CF) and Thordon composites. The PEEK/MoS2 composite may be a potential material for underwater equipment because of its outstanding anti-wear performance in aqueous boundary lubrication.
引用
收藏
页码:1660 / 1672
页数:13
相关论文