Experimental Investigation on Erosion of Ultrahigh-Performance Concrete with Short-Distance Water Impact Method

被引:0
作者
Liang, Tao [1 ]
Zhou, Jikai [1 ]
Wu, Qingqing [1 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210024, Peoples R China
基金
中国国家自然科学基金;
关键词
Ultrahigh performance concrete (UHPC); Short-distance water impact method; Hydraulic erosion; Mass loss; Erosion depth; HYDRO-ABRASIVE EROSION; UNDERWATER ABRASION; FLY-ASH; RESISTANCE; FIBER; WEAR; COMPOSITES; SIMULATION;
D O I
10.1061/JMCEE7.MTENG-16707
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper aims to propose a short-distance water impact method to test the hydraulic erosion resistance of ultrahigh performance concrete materials (UHPC). The method used high-velocity water flow to simulate a complex hydraulic erosion environment, and an erosion zone was applied to evaluate the erosion resistance of materials. The erosion depth and mass loss of the specimens were tested. The results showed that a water pressure of about 2 MPa can be applied by short-distance water impact. At an impact time of 3 h and an impact distance of 1 cm, the erosion depth and mass loss of specimens were maximized. Thereinto, the erosion depth of mortar was 37.6% higher than that of UHPC. The mass loss of UHPC was 40.7% lower than that of mortar. Three indices for evaluating erosion resistance, including erosion rate expressed in %, erosion rate expressed in g/h, and erosion resistance strength, were compared. In addition, the erosion rate expressed in % could take into account the instantaneous state of the erosion process and reflect the deterioration trend with respect to impact time. According to the surface fitting, a predictive model between the erosion rate and impact condition was established. The variation trend of UHPC will be flat after a long period of erosion. The underwater method is compared, and the field test result is discussed.
引用
收藏
页数:13
相关论文
共 49 条
[1]   A simple suggested approach to reduce the testing time of concrete surface abrasion using ASTM C1138 [J].
Abid, Sallal R. ;
Ali, Sajjad H. ;
Murali, G. ;
Al-Gasham, Thaar S. .
CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 15
[2]   Hydro-abrasive resistance of engineered cementitious composites with PP and PVA fibers [J].
Abid, Sallal R. ;
Shamkhi, Mohammed S. ;
Mahdi, Noor S. ;
Daek, Yasir H. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 187 :168-177
[3]   Experimental tests on the underwater abrasion of Engineered Cementitious Composites [J].
Abid, Sallal R. ;
Hilo, Ali N. ;
Daek, Yasir H. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 171 :779-792
[4]  
ASTM, 2019, Annual Book of Standards
[5]  
CABR (China Acadamy of Building Research), 2019, Standard for test methods of concrete physical and mechanical properties
[6]  
CABR (China Academy of Building Research), 2016, Standard for test method of performance on ordinary fresh concrete
[7]  
CBMF (China Building Materials Federation), 2021, Test method of cement mortar strength (ISO method)
[8]   A probability based model for the erosive wear of concrete by sediment bearing water [J].
Dandapat, Ramkrishna ;
Deb, Arghya .
WEAR, 2016, 350-351 :166-181
[9]   MECHANICS OF HIGH-SPEED LIQUID JETS [J].
FIELD, JE ;
LESSER, MB .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1977, 357 (1689) :143-+
[10]   Experimental study and field application of abrasion resistance for the repair of concrete water-conveying structures [J].
Gong, Jingwei ;
Qin, Can ;
Tang, Xinjun ;
Zhang, Tao .
MATERIALS AND STRUCTURES, 2022, 55 (07)