Effects of process parameters on the microstructure and mechanical properties of AISI 1045 steel prepared by selective laser melting

被引：6
作者：
Li, Yunzhe [1 ]
Liu, Shifeng [1 ]
Wang, Yan [1 ]
Wei, Yingkang [1 ]
Han, Lixiong [1 ]
Zhi, Hao [1 ]
Yang, Xin [2 ]
机构：
[1] Xian Univ Architecture & Technol, Sch Met Engn, Xian 710055, Peoples R China
[2] Xian Univ Technol, Coll Mat Sci & Engn, Xian 710048, Peoples R China
来源：
MATERIALS TODAY COMMUNICATIONS | 2023年 / 37卷
基金：
中国博士后科学基金; 中国国家自然科学基金;
关键词：
AISI; 1045; steel; Selective laser melting; Relative density; Microstructure; Strength; HEAT-TREATMENT; HIGH-STRENGTH; IMPACT;
D O I：
10.1016/j.mtcomm.2023.107287
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AISI 1045 steel is medium carbon low alloy steel, characterized by low cost and high comprehensive properties, and it is one of the most widely used steel materials. In this study, AISI 1045 steel was successfully prepared by selective laser melting (SLM) with optimized process parameters. The influence of powder layer thickness, scanning speed, and volume energy density (VED) on the relative density, microstructure, and mechanical properties of AISI 1045 steel has been systematically investigated. The results show that the phase composition of powder and SLMed-AISI 1045 steel is mainly alpha-Fe, the microstructure of sample is mainly fine martensite, and the grain size is mainly in the range of 0.3-1.7 mu m. The sample prepared by SLM has a crystal orientation of < 101 > direction. At the same time, twin martensite and nano-precipitate were found. The Vickers hardness and compressive strength of AISI 1045 steel prepared by SLM are 541 +/- 9 HV0.1 and 2055.85 MPa, respectively. The excellent mechanical properties are mainly attributed to fine grain strengthening and precipitation strength-ening. Finally, the tensile properties and friction resistance of commercial AISI 1045 steel were measured and compared with SLMed-AISI 1045 steel. The results show that SLMed-AISI 1045 steel has high strength and wear resistance, the yield strength is 3.6 times that of commercial AISI 1045 steel, while maintaining high ductility.
引用
收藏
页数：13
相关论文
共 40 条
  • [11] Laser weldability of TWIP980 with DP980/B1500HS/QP980 steels: Microstructure and mechanical properties
    Guo, Wei
    Wan, Zhandong
    Jia, Qiang
    Ma, Lixia
    Zhang, Hongqiang
    Tan, Caiwang
    Peng, Peng
    [J]. OPTICS AND LASER TECHNOLOGY, 2020, 124
  • [12] Seismic behavior and strength capacity of steel coupling beam-to-SRC wall joints
    Ji, Xiaodong
    Cheng, Yuhao
    Leong, Tongseng
    Cui, Yao
    [J]. ENGINEERING STRUCTURES, 2019, 201
  • [13] DT300 ultra-high strength steel fabricated using selective laser melting: Densification, microstructure, and mechanical properties
    Jiang, Chenyang
    Li, Xiaoqiang
    Luo, Hao
    Li, Jingmao
    Qu, Shengguan
    Yang, Chao
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 863
  • [14] Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
    King, Wayne E.
    Barth, Holly D.
    Castillo, Victor M.
    Gallegos, Gilbert F.
    Gibbs, John W.
    Hahn, Douglas E.
    Kamath, Chandrika
    Rubenchik, Alexander M.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (12) : 2915 - 2925
  • [15] Microstructure and mechanical properties of CuCrZr/316L hybrid components manufactured using selective laser melting
    Kuai, Zezhou
    Li, Zhonghua
    Liu, Bin
    Chen, Yanlei
    Li, Huodong
    Bai, Peikang
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 955
  • [16] Research trends in laser powder bed fusion of Al alloys within the last decade
    Kusoglu, Ihsan Murat
    Goekce, Bilal
    Barcikowski, Stephan
    [J]. ADDITIVE MANUFACTURING, 2020, 36
  • [17] Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 1045
    Lesyk, D. A.
    Martinez, S.
    Mordyuk, B. N.
    Dzhemelinskyi, V. V.
    Lamikiz, A.
    Prokopenko, G., I
    [J]. OPTICS AND LASER TECHNOLOGY, 2019, 111 : 424 - 438
  • [18] Heterogeneously tempered martensitic high strength steel by selective laser melting and its micro-lattice: Processing, microstructure, superior performance and mechanisms
    Li, Xinwei
    Tan, Yong Hao
    Willy, Habimana Jean
    Wang, Pan
    Lu, Wanheng
    Cagirici, Mehmet
    Ong, Chun Yee Aaron
    Herng, Tun Seng
    Wei, Jun
    Ding, Jun
    [J]. MATERIALS & DESIGN, 2019, 178
  • [19] In-situ generation of high-strength AISI 1045 steel with SiO2 nano-precipitation by selective laser melting (SLM)
    Li, Yunzhe
    Liu, Shifeng
    Zhi, Hao
    Yang, Xin
    Zhang, Jiayi
    Wang, Yan
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2023, 94 : 374 - 386
  • [20] Comparison of wear behavior of GCr15 bearing steel prepared by selective laser melting (SLM) and electron beam melting (EBM)
    Li, Yunzhe
    Liu, Shifeng
    Xue, Tong
    Wei, Yingkang
    Yang, Xin
    Wang, Yan
    [J]. MATERIALS LETTERS, 2021, 305
1234