Influence of pre-deformation on fatigue life of high strength steels by means of micromagnetic Barkhausen noise

被引：1
|
作者：
Sarafraz, Yashar [1 ]
Brink, Malte [1 ]
Baak, Nikolas [1 ]
Koch, Alexander [1 ]
Walther, Frank [1 ]
机构：
[1] TU Dortmund Univ, Chair Mat Test Engn, Baroper Str 303, D-44227 Dortmund, Germany
来源：
MATERIALS TESTING | 2023年 / 65卷 / 05期
关键词：
Barkhausen noise; high-strength steels; load increase fatigue tests; micromagnetic testing method; nondestructive testing; DYNAMICS;
D O I：
10.1515/mt-2022-0425
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The micromagnetic Barkhausen noise as a nondestructive testing method was employed in this work to analyze the fatigue behavior of high-strength steels by subjecting them to multi-stage load increase fatigue tests. The micromagnetic Barkhausen noise energy (MBNEnergy) was measured during fatigue tests and coupled with digital image correlation to evaluate the effect of static and cyclic stress as well as local surface strain on MBNEnergy. The test samples were prepared from the forged bainite 18MnCrMoV6 and two ferrite-pearlite 38MnVS6 and 46MnVS5 steels. A part of the specimens was pre-strained before cyclic loading to analyze the effect of pre-deformation on cyclic strength considering measured MBNEnergy. A significant increase in MBNEnergy was observed by increasing the cyclic load on 18MnCrMoV6 specimens with bainite phases while this increase of MBNEnergy was not significant or was not changed for ferrite-pearlite steels 38MnVS6 and 46MnVS5.
引用
收藏
页码：641 / 651
页数：11
相关论文
共 50 条
  • [31] Influence of microstructure on fatigue property of ultra high-strength steels
    Okuda, Kanji
    Ogawa, Kazuhiro
    Ichikawa, Yuji
    Shiozaki, Tsuyoshi
    Yamaguchi, Naoki
    FRATTURA ED INTEGRITA STRUTTURALE, 2019, 13 (48): : 125 - 134
  • [32] Influence of laser cutting on the fatigue limit of two high strength steels
    Mateo, Antonio
    Fargas, Gemma
    Calvo, Jessica
    Roa, Joan Josep
    MATERIALS TESTING, 2015, 57 (02) : 136 - 140
  • [33] INFLUENCE OF HIGH-TEMPERATURE PRE-DEFORMATION ON PLASTIC PROPERTIES OF MGO SINGLE-CRYSTALS
    BEREZHKOVA, GV
    PERSTNEV, PP
    DOKLADY AKADEMII NAUK SSSR, 1979, 248 (05): : 1105 - 1108
  • [34] Prediction of fatigue life on high-strength steels in very high cycle regime
    Shiozawa, Kazuaki
    Shimatani, Yuuji
    Murata, Shoichiro
    Lu, Lientao
    Li, Sizeng
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2012, 78 (793): : 1300 - 1313
  • [35] The effect of creep pre-deformation on high-temperature fatigue behaviour of the titanium alloy IMI834
    Hardt, S
    Maier, HJ
    Christ, HJ
    LOW CYCLE FATIGUE AND ELASTO-PLASTIC BEHAVIOUR OF MATERIALS, 1998, : 9 - 14
  • [36] Long Life High Strength Steels to Resist Fatigue Failure and Delayed Fracture
    Hui, Weijun
    Dong, Han
    Weng, Yuqing
    Shi, Jie
    Wang, Maoqiu
    ADVANCED STEELS: THE RECENT SCENARIO IN STEEL SCIENCE AND TECHNOLOGY, 2011, : 137 - 159
  • [37] Fatigue life of welded high-strength steels under Gaussian loads
    Moeller, Benjamin
    Wagener, Rainer
    Hrabowski, Jennifer
    Ummenhofer, Thomas
    Melz, Tobias
    3RD INTERNATIONAL CONFERENCE ON MATERIAL AND COMPONENT PERFORMANCE UNDER VARIABLE AMPLITUDE LOADING, VAL 2015, 2015, 101 : 293 - 301
  • [38] Fatigue life of PAW welded joints of high strength microalloyed boron steels
    Carlos Nadale, Horacio
    Gabriel Svoboda, Hernan
    MATERIA-RIO DE JANEIRO, 2018, 23 (02):
  • [39] Influence of pre-deformation and oxidation in high temperature water on corrosion resistance of type 304 stainless steel
    Lv Jinlong
    Luo Hongyun
    Liang Tongxiang
    JOURNAL OF NUCLEAR MATERIALS, 2015, 466 : 154 - 161
  • [40] Influence of shot peening on fatigue properties in ultra-high strength steels
    Gao, YK
    Wu, XR
    Lu, F
    Yao, M
    Yang, QX
    RESIDUAL STRESSES VII, PROCEEDINGS, 2005, 490-491 : 448 - 453
12345