Parameter fitting of constitutive model and FEM analysis of solder joint thermal cycle reliability for lead-free solder Sn-3.5Ag

被引：0
|
作者：
周萍 [1 ]
胡炳亭 [1 ]
周孑民 [1 ]
杨莺 [1 ]
机构：
[1] School of Energy Science and Engineering,Central South University
来源：
Journal of Central South University of Technology | 2009年 / 16卷 / 03期
基金：
中国国家自然科学基金;
关键词：
lead free solder; Sn-3.5Ag alloy; Sn-37Pb alloy; constitutive model; tensile; FEM analysis; thermal cycle reliability;
D O I：
暂无
中图分类号：
TN05 [制造工艺及设备];
学科分类号：
080901 ;
摘要：
The experimental tests of tensile for lead-free solder Sn-3.5Ag were performed for the general work temperatures range from 11 to 90 ℃ and strain rate range from 5×10-5 to 2×10-2 s-1, and its stress—strain curves were compared to those of solder Sn-37Pb. The parameters in Anand model for solder Sn-3.5Ag were fitted based on experimental data and nonlinear fitting method, and its validity was checked by means of experimental data. Furthermore, the Anand model was used in the FEM analysis to evaluate solder joint thermal cycle reliability. The results show that solder Sn-3.5Ag has a better creep resistance than solder Sn-37Pb. The maximum stress is located at the upper right corner of the outmost solder joint from the symmetric center, and thermal fatigue life is predicted to be 3.796×104 cycles under the calculated conditions.
引用
收藏
页码：339 / 343
页数：5
相关论文
共 50 条
  • [1] Parameter fitting of constitutive model and FEM analysis of solder joint thermal cycle reliability for lead-free solder Sn-3.5Ag
    Ping Zhou
    Bing-ting Hu
    Jie-min Zhou
    Ying Yang
    Journal of Central South University of Technology, 2009, 16 : 339 - 343
  • [2] Parameter fitting of constitutive model and FEM analysis of solder joint thermal cycle reliability for lead-free solder Sn-3.5Ag
    Zhou Ping
    Hu Bing-ting
    Zhou Jie-min
    Yang Ying
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2009, 16 (03): : 339 - 343
  • [3] Modified Anand constitutive model for lead-free solder Sn-3.5Ag
    Chen, X
    Chen, G
    Sakane, M
    ITHERM 2004, VOL 2, 2004, : 447 - 452
  • [4] Effects of In/Ce to Sn-3.5Ag Lead-free Solder on Microstructures and Properties
    Chen, Enjia
    Zhao, Xiuchen
    Liu, Ying
    Li, Dongmei
    Cheng, Jingwei
    Li, Hong
    MATERIALS PERFORMANCE, MODELING AND SIMULATION, 2013, 749 : 198 - +
  • [5] Prediction of stress-strain relationship with an improved Anand constitutive model for lead-free solder Sn-3.5Ag
    Chen, X
    Chen, G
    Sakane, M
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2005, 28 (01): : 111 - 116
  • [6] Effects of rapid solidification on the microstructure and microhardness of a lead-free Sn-3.5Ag solder
    Shen Jun
    Liu Yongchang
    Han Yajing
    Gao Houxiu
    RARE METALS, 2006, 25 (04) : 365 - 370
  • [7] Effects of rapid solidification on the microstructure and microhardness of a lead-free Sn-3.5Ag solder
    SHEN Jun1)
    Rare Metals, 2006, (04) : 365 - 370
  • [8] Improvement in Intermetallic Thickness and Joint Strength in Carbon Nanotube Composite Sn-3.5Ag Lead-free Solder
    Mayappan, Ramani
    Hassan, Anis Afiqah
    Ab Ghani, Noor Asikin
    Yahya, Iziana
    Andas, Jeyashelly
    MATERIALS TODAY-PROCEEDINGS, 2016, 3 (06) : 1338 - 1344
  • [9] Intermetallics evolution in Sn-3.5Ag based lead-free solder matrix on an OSPCu finish
    Gao, Feng
    Nishikawa, Hiroshi
    Takemoto, Tadashi
    JOURNAL OF ELECTRONIC MATERIALS, 2007, 36 (12) : 1630 - 1634
  • [10] Effect of axial ratcheting deformation on torsional low cycle fatigue life of lead-free solder Sn-3.5Ag
    Gao, Hong
    Chen, Xu
    INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (02) : 276 - 283
12345