Effect of Intercritical Annealing Parameters on Dual Phase Behavior of Commercial Low-Alloyed Steels

被引:0
|
作者
Aydin Hüseyin [1 ]
Kazdal Zeytin Havva [1 ]
Kubilay Ceylan [1 ]
机构
[1] TUBíTAK Marmara Research Center(MAM),Materials Institute
关键词
dual phase steel; carbon steel; alloyed steel; mechanical test; metallography; heat treatment;
D O I
10.13228/j.boyuan.issn1006-706x.2010.04.008
中图分类号
TG142.33 [合金钢];
学科分类号
摘要
The effects of some intercritical annealing parameters including heating rate,soaking temperature,soaking time,and quench media on the microstructure and mechanical properties of cold-rolled dual phase steel were studied.The microstructure of specimens quenched after each annealing stage was analyzed using optical microscope.The tensile properties,determined for specimens submitted to complete annealing cycles,were influenced by the volume fractions of multiphases(originated from martensite,bainite,and retained austenite),which depend on the annealing process parameters.The results obtained showed that the yield strength and the ultimate tensile strength increase with increasing the intercritical temperature and cooling rate.This can be explained by higher martensite volume ratio with the increased volume fraction of austenite formed at the higher temperatures and cooling rates.
引用
收藏
页码:73 / 78
页数:6
相关论文
共 50 条
  • [41] ACCELERATED CARBIDE SPHEROIDISATION (ASR) IN LOW-ALLOYED STEELS
    Dlouhy, Jaromir
    Hauserova, Daniela
    Novy, Zbysek
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 539 - 544
  • [42] Sulphidation of Low-Alloyed Steels Used in Power Industry
    T. Dudziak
    K. Jura
    P. Dudek
    L. Boroń
    J. Rutkowska
    Oxidation of Metals, 2019, 92 : 379 - 399
  • [43] GROWTH OF AUSTENITE IN THE INTERCRITICAL ANNEALING OF FE-C-MN DUAL PHASE STEELS
    WYCLIFFE, PA
    PURDY, GR
    EMBURY, JD
    CANADIAN METALLURGICAL QUARTERLY, 1981, 20 (03) : 339 - 350
  • [44] METHOD FOR TESTING BEHAVIOR OF UNALLOYED AND LOW-ALLOYED STEELS TOWARD STRESS CRACK CORROSION
    FRIEHE, W
    STAHL UND EISEN, 1970, 90 (16): : 876 - &
  • [45] The effect of nonmetal inclusions and microstructure on local corrosion of carbon and low-alloyed steels
    Reformatskaya, II
    Rodionova, IG
    Beilin, YA
    Nisel'son, LA
    Podobaev, AN
    PROTECTION OF METALS, 2004, 40 (05): : 447 - 452
  • [46] INFLUENCE OF INTERCRITICAL ANNEALING ON STRENGTH AND IMPACT BEHAVIOR OF STEELS
    MINTZ, B
    VIPOND, R
    NASSAR, A
    MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (09) : 760 - 772
  • [47] Mössbauer study of the annealing effect on low‐alloyed steels
    F.Z. Bentayeb
    B. Bouzabata
    S. Alleg
    Hyperfine Interactions, 2000, 128 : 375 - 380
  • [48] Computer Simulation for the Prediction of Phase Composition and Structure of Low-Alloyed Steels with Carbonitride Hardening
    V. V. Popov
    I. I. Gorbachev
    Physics of Metals and Metallography, 2018, 119 : 1333 - 1337
  • [49] Computer Simulation for the Prediction of Phase Composition and Structure of Low-Alloyed Steels with Carbonitride Hardening
    Popov, V. V.
    Gorbachev, I. I.
    PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (13): : 1333 - 1337
  • [50] In situ characterization of galvanized low-alloyed steels with high-temperature cyclic voltammetry during annealing
    Kavunga, Sunil
    Luckeneder, Gerald
    Schachinger, Ernst Dietmar
    Faderl, Josef
    Fafilek, Günter
    Electrochimica Acta, 2022, 424