Effect of Intercritical Annealing Parameters on Dual Phase Behavior of Commercial Low-Alloyed Steels

被引：0
|
作者：
Aydin Hüseyin [1 ]
Kazdal Zeytin Havva [1 ]
Kubilay Ceylan [1 ]
机构：
[1] TUBíTAK Marmara Research Center(MAM),Materials Institute
来源：
JournalofIronandSteelResearch(International) | 2010年 / 17卷 / 04期
关键词：
dual phase steel; carbon steel; alloyed steel; mechanical test; metallography; heat treatment;
D O I：
10.13228/j.boyuan.issn1006-706x.2010.04.008
中图分类号：
TG142.33 [合金钢];
学科分类号：
摘要：
The effects of some intercritical annealing parameters including heating rate,soaking temperature,soaking time,and quench media on the microstructure and mechanical properties of cold-rolled dual phase steel were studied.The microstructure of specimens quenched after each annealing stage was analyzed using optical microscope.The tensile properties,determined for specimens submitted to complete annealing cycles,were influenced by the volume fractions of multiphases(originated from martensite,bainite,and retained austenite),which depend on the annealing process parameters.The results obtained showed that the yield strength and the ultimate tensile strength increase with increasing the intercritical temperature and cooling rate.This can be explained by higher martensite volume ratio with the increased volume fraction of austenite formed at the higher temperatures and cooling rates.
引用
收藏
页码：73 / 78
页数：6
相关论文
共 50 条
  • [31] The modeling of retained austenite in low-alloyed TRIP steels
    G. Reisner
    E. A. Werner
    P. Kerschbaummayr
    I. Papst
    F. D. Fischer
    JOM, 1997, 49 : 62 - 65
  • [32] Technological Features of Vacuum Carburizing of Low-Alloyed Steels
    Smirnov, A. E.
    Fakhurtdinov, R. S.
    Ryzhova, M. Yu.
    Pakhomova, S. A.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2019, 48 (02) : 167 - 172
  • [33] Austenitic Surfacing on Unalloyed or Low-Alloyed Steels.
    Mueller, Ralf
    Schweisstechnik (Berlin), 1973, 23 (07): : 289 - 293
  • [34] CORROSION OF LOW-ALLOYED STEELS IN LIQUID-AMMONIA
    HUERTA, D
    HEUSLER, KE
    WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1994, 45 (09): : 489 - 497
  • [35] The modeling of retained austenite in low-alloyed TRIP steels
    Reisner, G
    Werner, EA
    Kerschbaummayr, P
    Papst, I
    Fischer, FD
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (09): : 62 - &
  • [36] Technological Features of Vacuum Carburizing of Low-Alloyed Steels
    A. E. Smirnov
    R. S. Fakhurtdinov
    M. Yu. Ryzhova
    S. A. Pakhomova
    Journal of Machinery Manufacture and Reliability, 2019, 48 : 167 - 172
  • [37] Using Intercritical CCT Diagrams and Multiple Linear Regression for the Development of Low-Alloyed Advanced High-Strength Steels
    Navarrete Pino, Bryan Y.
    Torres Castillo, Antonio A.
    Gutierrez Castaneda, Emmanuel J.
    Espinosa Zuniga, Luis A.
    Hernandez Hernandez, Lorena
    Salinas Rodriguez, Armando
    Deaquino Lara, Rogelio
    Saldana Garces, Rocio
    Reyes Dominguez, Ivan A.
    Aguilar Carrillo, Javier
    Bedolla Jacuinde, Arnoldo
    Garay Reyes, Carlos G.
    Martinez Sanchez, Roberto
    METALS, 2021, 11 (11)
  • [38] Softening of Low-alloyed Titanium Billets with Laser Annealing
    Murzin, Serguei P.
    Kazanskiy, Nikolay L.
    2017 INTERNATIONAL CONFERENCE ON AEROSPACE TECHNOLOGY, COMMUNICATIONS AND ENERGY SYSTEMS (ATCES 2017), 2018, 302
  • [39] The Effect of Nonmetal Inclusions and Microstructure on Local Corrosion of Carbon and Low-alloyed Steels
    I. I. Reformatskaya
    I. G. Rodionova
    Yu. A. Beilin
    L. A. Nisel'son
    A. N. Podobaev
    Protection of Metals, 2004, 40 : 447 - 452
  • [40] EFFECT OF THE LOADING RATE ON THE FRACTURE-TOUGHNESS CHARACTERISTICS OF LOW-ALLOYED STEELS
    PROKOPENKO, AV
    ZNACHKOVSKII, OY
    POKROVSKII, VV
    IZAROV, MA
    MAISTRENKO, AL
    INDUSTRIAL LABORATORY, 1979, 45 (07): : 820 - 825
12345