Evaluation of plasma sprayed YSZ thermal barrier coatings with the CMAS deposits infiltration using impedance spectroscopy

被引:1
|
作者
Musharaf Abbas [1 ]
机构
[1] Key Laboratory of Aerospace Materials & Performance(Ministry of Education),School of Materials Science and Engineering,Beihang Univerisity
关键词
Calcium-magnesium-alumino-silicate; Thermal barrier coatings; Plasma spray; Impedance spectroscopy;
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
摘要
The yttria-stabilized zirconia(YSZ) thermal barrier coatings(TBCs) prepared by atmospheric plasma spraying with different heat treatment period at the temperature of 1250 1C were studied in the present investigation.Electrochemical impedance spectroscopy(EIS) was employed to nondestructively examine the impedance and capacitance behavior of free standing YSZ coatings deposited by plasma spray with CMAS(calcium-magnesium-alumino-silicate) infiltration.Equivalent circuit was established on the basis of the biomodal structure in coatings.The sintering behavior of the coatings can be reflected by the changes of resistance and capacitance of the coating.By EIS,the microstructure evolution of the coating with CMAS deposits was discussed in detail.
引用
收藏
页码:40 / 47
页数:8
相关论文
共 50 条
  • [31] A novel strategy to control the microstructure of plasma-sprayed YSZ thermal barrier coatings
    Huang, Ji Bo
    Wang, Wei Ze
    Li, Yuan Jun
    Fang, Huan Jie
    Ye, Dong Dong
    Zhang, Xian Cheng
    Tu, Shan Tung
    SURFACE & COATINGS TECHNOLOGY, 2020, 402
  • [32] CMAS infiltration behavior of atmospheric plasma-sprayed thermal barrier coating with tailored pore structures
    Yang, Ting
    Wang, Weize
    Tang, Zhongxiang
    Liu, Yangguang
    Li, Kaibin
    Liu, Wei
    Zhang, Wenkang
    Ye, Dongdong
    CERAMICS INTERNATIONAL, 2024, 50 (05) : 7218 - 7229
  • [33] Nondestructive evaluation of plasma-sprayed thermal barrier coatings
    D. J. Andrews
    J. A. T. Taylor
    Journal of Materials Engineering and Performance, 1997, 6 : 591 - 595
  • [34] Nondestructive evaluation of plasma-sprayed thermal barrier coatings
    Andrews, DJ
    Taylor, JAT
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1997, 6 (05) : 591 - 595
  • [35] Influence of pores on mechanical properties of plasma sprayed coatings: Case study of YSZ thermal barrier coatings
    Qiao, X.
    Wang, Y. M.
    Weng, W. X.
    Liu, B. L.
    Li, Q.
    CERAMICS INTERNATIONAL, 2018, 44 (17) : 21564 - 21577
  • [36] Plasma spraying of thermal barrier coatings using YSZ powders
    Gulyaev, Igor
    Kuzmin, Victor
    Kornienko, Elena
    Vyalova, Anastasiya
    Tyryshkin, Pavel
    Sergachev, Dmitriy
    Vashchenko, Sergey
    MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 2134 - 2138
  • [37] CMAS corrosion of YSZ thermal barrier coatings obtained by different thermal spray processes
    Morelli, Stefania
    Testa, Veronica
    Bolelli, Giovanni
    Ligabue, Omar
    Molinari, Eleonora
    Antolotti, Nelso
    Lusvarghi, Luca
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (12) : 4084 - 4100
  • [38] The effect of CMAS interaction on thermal cycle lifetime of YSZ based thermal barrier coatings
    Bal, Emre
    Karabas, Muhammet
    Taptik, I. Yilmaz
    MATERIALS RESEARCH EXPRESS, 2018, 5 (06):
  • [39] Non-destructive evaluation of thermal barrier coatings using impedance spectroscopy
    Wang, X
    Mei, JF
    Xiao, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (07) : 855 - 859
  • [40] Plasma-sprayed nanostructured YSZ thermal barrier coatings: Thermal insulation capability and adhesion strength
    Ghasemi, Reza
    Vakilifard, Hamideh
    CERAMICS INTERNATIONAL, 2017, 43 (12) : 8556 - 8563