Experimental investigation of the cyclic degradation of the one-way shape memory effect of NiTi alloys

被引:0
|
作者
Tian-xing Zhao [1 ,2 ]
Guo-zheng Kang [1 ,2 ]
Chao Yu [1 ,2 ]
Qian-hua Kan [1 ,2 ]
机构
[1] Institute of Applied Mechanics, State Key Laboratory of Traction Power, Southwest Jiaotong University
[2] Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University
基金
中国国家自然科学基金;
关键词
Ni Ti shape memory alloys; one-way shape memory effect; cyclic degradation; thermo-mechanical coupling; martensite orientation;
D O I
暂无
中图分类号
TG139.6 [];
学科分类号
080502 ;
摘要
Based on stress-and strain-controlled cyclic tension-unloading-heat-cooling tests, cyclic degradation of the one-way shape memory effect(OWSME) of NiTi shape memory alloys(SMAs) was investigated. It was seen, in thermo-mechanical coupled cyclic tests, that residual strain after each cycle accumulated, but the martensite reorientation stress and dissipation energy-per-cycle decreased as the number of cycles increased. Meanwhile, the cyclic degradation of OWSME was aggravated by increasing the stress/strain amplitude. In addition, the stress-strain response of NiTi SMAs was further investigated by performing simultaneous thermo-mechanical coupled cyclic tests with various phase-angle differences between the mechanical and thermal cyclic loadings. It can be concluded that such cyclic response depends significantly on prescribed phase-angle differences. Obtained experimental results are helpful for both the development of constitutive models and engineering applications of NiTi SMAs.
引用
收藏
页码:1539 / 1550
页数:12
相关论文
共 50 条
  • [21] Investigation on machinability of NiTi shape memory alloys under different cooling conditions
    Yanzhe Zhao
    Kai Guo
    Jianfeng Li
    Jie Sun
    The International Journal of Advanced Manufacturing Technology, 2021, 116 : 1913 - 1923
  • [22] Physical mechanism based crystal plasticity model of NiTi shape memory alloys addressing the thermo-mechanical cyclic degeneration of shape memory effect
    Yu, Chao
    Kang, Guozheng
    Kan, Qianhua
    Xu, Xiang
    MECHANICS OF MATERIALS, 2017, 112 : 1 - 17
  • [23] Phenomenological hysteretic model for superelastic NiTi shape memory alloys accounting for functional degradation
    Lee, Chang Seok
    Jeon, Jong-Su
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2022, 51 (02) : 277 - 309
  • [24] On the effect of TiC particles on the tensile properties and on the intrinsic two way effect of NiTi shape memory alloys produced by powder metallurgy
    Johansen, K
    Voggenreiter, H
    Eggeler, G
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 273 : 410 - 414
  • [25] An experimental study of the superelastic behavior in NiTi shape memory alloys under biaxial proportional and non-proportional cyclic loadings
    Wang, X. M.
    Wang, Y. F.
    Lu, Z. Z.
    Deng, C. H.
    Yue, Z. F.
    MECHANICS OF MATERIALS, 2010, 42 (03) : 365 - 373
  • [26] Three-Dimensional Phase-Field Simulation of Stress-Assisted Two-Way Shape Memory Effect and Its Cyclic Degradation of Single-Crystal NiTi Shape Memory Alloy
    Xu, Bo
    Yu, Chao
    Wang, Chong
    Wang, Qingyuan
    Kang, Guozheng
    ACTA MECHANICA SOLIDA SINICA, 2024, 37 (06) : 858 - 872
  • [27] Effect of the thermomechanical coupling on fatigue crack propagation in NiTi shape memory alloys
    You, Yajun
    Zhang, Yahui
    Moumni, Ziad
    Anlas, Gunay
    Zhang, Weihong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 685 : 50 - 56
  • [28] Dependence of functional degradation on crystallographic orientation in NiTi shape memory alloys aged under stress
    Weighardt, S. C.
    Maier, H. J.
    Chumlyakov, Y. I.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : S219 - S221
  • [29] Welding and Joining of NiTi Shape Memory Alloys: A Review
    Oliveira, J. P.
    Miranda, R. M.
    Fernandes, F. M. Braz
    PROGRESS IN MATERIALS SCIENCE, 2017, 88 : 412 - 466
  • [30] Powder Metallurgical Processes for NiTi Shape Memory Alloys
    Neves, F.
    Fernandes, F. M. Braz
    Martins, I.
    Correia, J. B.
    Oliveira, M.
    Gaffet, E.
    Boucharat, N.
    Lattemann, M.
    Suffner, J.
    Hahn, H.
    ADVANCED MATERIALS FORUM V, PT 1 AND 2, 2010, 636-637 : 928 - +