MechanicalPropertiesandMicrostructureofInSituTiB2-7055Composites

被引：7

作者：

CHEN dongLE YongkangBAI LiangMA NaihengLI XianfengWANG Haowei The State Key laboratory of Metal Matrix CompositesShanghai JiaoTong UniversityShanghai China ^{[200030
]}

机构：

来源：

Chinese Journal of Aeronautics | 2006年 / S1期

关键词：

metal matrix composite; in situ; mechanical properties; microstructure;

D O I：

暂无

中图分类号：

V257 [金属和非金属复合材料];

学科分类号：

0805 ; 080502 ;

摘要：

In order to fabricate a kind of high strength particulate reinforced aluminum-matrix composites, the high strength aluminum alloy 7055 was selected as a matrix. Composites reinforced with varying amounts of TiB2 particles were synthesized using the in situ method, and their mechanical properties and microstructure were analyzed. It is found that the in situ TiB2 particles sized from 50 to 400 nm uniformly disperse in the matrix. With the weight fraction of TiB2 particles increasing, the elastic modulus as well as the yield strength and the ultimate tensile strength increase, while the ductility decrease. The improvement of strength could be attributed to good bonding between TiB2 and the matrix, and also the TiB2 particles act as a barrier to dislocation.

引用

页码：66 / 70

页数：5

共 50 条

[41] MECHANICAL PROPERTIES OF CAST ALUMINIUM MATRIX COMPOSITES REINFORCED WITH SIC AND AL2O3 PARTICLES [J].

Antin, Kim-Niklas ;

Jalava, Kalle .

20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,

[42] Synthesis and Characterization of Novel Aluminum Composites: A Compo-Casting Approach with ZrO2 , Al2 O3 , and SiC [J].

Farahany, S. ;

Hamdani, M. K. ;

Salehloo, M. R. ;

Krol, M. ;

Cheraghali, E. .

ARCHIVES OF FOUNDRY ENGINEERING, 2024, 24 (02) :88-97

[43] Hot-pressed laminated composites consisting of ZrB2-SiC ceramic and Cf/ZrB2-SiC composites [J].

Guo, Shuqi .

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2016, 124 (02) :166-171

[44] Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2-SiC composites [J].

Tang, Sufang ;

Deng, Jingyi ;

Wang, Shijun ;

Liu, Wenchuan .

CORROSION SCIENCE, 2009, 51 (01) :54-61

[45] Microwave sintering of β-SiAlON-ZrO2 composites [J].

Chockalingam, Sreekumar ;

Traver, Henry Kodi .

MATERIALS & DESIGN, 2010, 31 (08) :3641-3646

[46] ZrB2-SiC laminated ceramic composites [J].

Lu, Zhihui ;

Jiang, Dongliang ;

Zhang, Jingxian ;

Lin, Qingling ;

Huang, Zhengren .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (07) :1435-1439

[47] Microstructural characteristics and wear properties of Si3N4/ ZrO2 reinforced Al7055 alloy T6 heat treated metal matrix composites [J].

Ahmad, Nehal ;

Verma, Munna ;

Nagaral, Madeva ;

Kachhap, Sabindra .

Interactions, 2024, 245 (01)

[48] Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles [J].

Xiao, Peng ;

Gao, Yimin ;

Yang, Cuicui ;

Liu, Zhiwei ;

Li, Yefei ;

Xu, Feixing .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 710 :251-259

[49] Mechanical properties of Al-15Mg2Si composites prepared under different solidification cooling rates [J].

Safary, E. ;

Taghiabadi, R. ;

Ghoncheh, M. H. .

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2022, 29 (06) :1249-1260

[50] Study of Parametric Influence on Dry Sliding Wear and Corrosion Behavior of AA5754-TiB2 In Situ Composites [J].

Venkatasubbaiah, K. ;

Raju, K. Brahma ;

Alamanda, Ramki ;

Suresh, Ch ;

Jagadish, K. E. .

SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2020, 13 (03) :257-270

← 1 2 3 4 5 →