Al2O3 PARTICLE REINFORCED COPPER MATRIX COMPOSITE USING FOR CONTINUOUS CASTING MOULD

被引：3
|
作者：
S.H.Liang and Z.K.Fan The Department of Material and Engineering
机构：
来源：
ActaMetallurgicaSinica(EnglishLetters) | 1999年 / 05期
关键词：
hot pressing and sintering; composites; structure and properties; mould;
D O I：
暂无
中图分类号：
TG249.7 [连续、半连续铸造];
学科分类号：
摘要：
A kind of Cu base composite reinforced by 0 1μm Al 2O 3 particles were prepared by hot pressing and sintering process for steel continuous casting mould. The microstructure and properties were studied. The results show that the Al 2O 3 particle distribution is uniform, and the particles refine the grain size. The tensile fracture is a mixture of quasi cleavage and dimple due to the moderate interface strength. As a result, the composite has better soft resistance and wear resistance than those of Cu and Cu alloy. With increase in super fine Al 2O 3, the density and electric conductivity of the composite decrease, but hardness and strength increase.
引用
收藏
页码：782 / 786
页数：5
相关论文
共 50 条
  • [41] Al2O3 Particles Reinforced Aluminium Matrix Composite Fabricated by Pressureless Infiltration Technique
    Zhang Qiang
    Jiang Longtao
    Chen Guoqin
    Wu Gaohui
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 525 - 528
  • [42] A Study of Al-Mg/Al2O3 Particle Composite
    张振信
    孙文山
    孙永立
    哈尔滨理工大学学报, 1992, (01) : 55 - 59
  • [43] Degradation mechanism of 6063 aluminium matrix composite reinforced with TiC and Al2O3 particles
    Ao, Min
    Liu, Huimin
    Dong, Chaofang
    Feng, Shan
    Liu, Juncheng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 859
  • [44] Effect of La2O3 addition on copper matrix composites reinforced with Al2O3 ceramic particles
    Dang Cong
    Liu Huimin
    Feng Shan
    Qu Yuan
    Hu Qilong
    Jiang Jiachen
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [45] In situ Al2O3 particle-reinforced Al and Cu matrix composites synthesized by displacement reactions
    Yang, Bin
    Sun, Miao
    Gan, Guisheng
    Xu, Cunguan
    Huang, Zanjun
    Zhang, Haibo
    Fang, Zhigang Zak
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 494 (1-2) : 261 - 265
  • [46] Microstructure of surface composite Al2O3/Ni on copper substrate produced by vacuum infiltration casting
    Yang, GR
    Song, WM
    Lu, JJ
    Hao, Y
    Li, YM
    Ma, Y
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2): : 223 - 228
  • [47] Influence of glass phase on Al2O3 fiber-reinforced Al2O3 composites processed by slip casting
    Licciulli, Antonio
    Contaldi, Vincenzo
    Padmanabhan, Sanosh Kunjalukkal
    Balakrishnan, Avinash
    Siligardi, Cristina
    Diso, Daniela
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (03) : 385 - 389
  • [48] Formation of nanostructured eutectic network in α-Al2O3 reinforced Al-Cu alloy matrix composite
    Yu, P
    Deng, CH
    Ma, NG
    Yau, MY
    Ng, DHL
    ACTA MATERIALIA, 2003, 51 (12) : 3445 - 3454
  • [49] In situ synthesis of Al2O3 particulate-reinforced Al matrix composite by low temperature sintering
    H. Huo
    K. D. Woo
    Journal of Materials Science, 2006, 41 : 3249 - 3253
  • [50] The effect of mechanical alloying on Al2O3 distribution and properties of Al2O3 particle reinforced Al-MMCs
    Canakci, Aykut
    Varol, Temel
    Ertok, Saban
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2012, 19 (03) : 227 - 235
12345